DUCT AS-RH 4638343 - Caterpillar

Location of Bracket on Hood
Illustration 4 g01276609
(GGG) 209.8 mm (8.26 inch) (HHH) 11.0 mm (0.43 inch) (JJJ) 21.8 mm (0.86 inch) (KKK) 13.8 mm (0.54 inch) (LLL) 56.5 mm (2.22 inch) (MMM) 52.7 mm (2.08 inch) (NNN) 249.7 mm (9.83 inch)
Drill three holes (HHH). See illustration 4 for the location of the drilled holes.
Attach bracket (9) to the hood by using three bolts and three washers.
Attach the fuel filter to bracket (9) by using the existing three bolts, three washers, and one clip (ladder).Changes to Rear of Machine (Fuel Tank)
Illustration 5 g01276407
New hose on left and old hose on right
Remove hose (21) from the old hose arrangement.
Rotate elbow (20) .
Replace existing hose with 650 mm (25.6 inch) of hose (2) .Changes to Front of Machine (Engine Compartment)
Illustration 6 g01276432
Disconnect supply hose (22) from pipe.
Illustration 7 g01276443
Connect 1520 mm (59.8 inch) of hose (3) by using two clamps (5) and coupling (7) .
Illustration 8 g01276603
New fitting on left old fitting on right
Remove 164-5562 Connector Gp (23) .
Install fitting (1) .
Add 1930 mm (76.0 inch) of hose (4) to fitting (1). Then connect to pipe that is shown in Illustration 6.Routing the Hoses
Illustration 9 g01276800
Use strap (6) to hold the three hoses to the other two hoses on the engine.
Illustration 10 g01276804
(24) Connection with old hose
Use strap (6) to hold the two hoses together.
Use strap (6) in order to hold the fuel tank line with 207-2524 Hose As from 236-3975 Power Train Oil Lines Gp .Installing the New Wiring Harness
Illustration 11 g01276827
Illustration 12 g01276817
Connection with fuel pump
Connect plug (14) to the fuel pump. Secure harness (10) to clip (ladder) with a strap.
Illustration 13 g01276825
(25) 223-7577 Magnetic Switch Gp
Connect ground wire (17) to the existing bolt for the intake manifold.
Illustration 14 g01276848
Use two straps (6) to hold the harness.
Remove wire from pin A of the 3-pin connector.
Connect wire connection (15) to pin A of the 3-pin connector.