DUCT 5I5284 - Caterpillar

Table 1
Required Tools    
Media Number     Description     Quantity    
NETG5037     IQANDevelop     1    The following components are part of the software kit that is listed above.
RS-232 Serial Cable
Access Key
CD with IQANDevelop SoftwareNote: The IQANDevelop software on the CD may not be the latest version of the software. You may need to download the IQANDevelop software from the Parker web site.
Access the following web site:http://www.parker.com/iqan/
Select "Products" from the menu option.
Select "Software".
Select "IQAN Software G3 with manual ed0337.zip".Download flash file "2461606.idt" through SIS. There are two different ways to retrieve information from SIS. Information may be accessed through SIS (CD/DVD) or through the SIS (Web).
Go to Step 2 in order to download the flash file from the SIS (web). Go to Step 3 in order to download the flash file from SIS (CD/DVD).
Illustration 1 g01031855
Download the flash file (.idt file) for your machine from the SIS (web).
Go to the web site for SIS.
Type the serial number prefix of your machine in field (1) .
Select "Flash Software Files" (2) .
Illustration 2 g01031861
Type the ".idt" into the "Flash Filename" window (3). Select "Search" (4). This will list all of the ".idt" files.
Place the cursor over "2461606.idt".
Press and hold down the right mouse button. A menu will appear. Move the cursor to the "Save Link As". Release the right mouse button.
The "Save as" menu will appear. Save the file onto your PC.
Use the following procedure to download the flash files from SIS (CD/DVD).
Insert the SIS (CD/DVD) into your computer.
View the contents of the SIS (CD/DVD). Select the "Readxref.txt" file in order to view a complete listing of all flash documents that can be used to identify the proper flash file for your application.
Save the file to your PC.
Illustration 3 g01031878
Connect the serial cable between your PC and the IQAN system connection on your machine.
Remove two screws (5) .
Flip the IQAN-MDM downward.
Illustration 4 g01031909
Connect the serial cable between your PC and IQAN system connection (6) .
Turn the engine start switch key to the ON position in order to activate the IQAN system on your machine.
Retrieve the flash file (.idt file) that was downloaded and saved to your PC by selecting "Open" from the "File" menu.
Select "Send application" from the "System" menu. The following window will appear.
Illustration 5 g01031915
Note: Use the settings that are shown in the Illustration above. See the following "Definitions" for a description of each selection.
Select "Send" (7) in order to send the application. (A) Use this setting in order to keep the settings for your adjustable values. However, you will not see the new enhancements and settings of the file that was flashed until you reset your "driver mode". See your Operation and Maintenance Manual, "Reset Mode". (B) Use this setting in order to use the new enhancements and settings from the factory. Your "driver modes" will be automatically reset to the factory settings of the file that was flashed.
A message screen will show the download in progress.Definitions
Note: Errors must be corrected before the application can be sent. To communicate