EDGE 1004345 - Caterpillar

Service Brake Holding Ability Test
Personal injury can result if the machine moves while testing.If the machine begins to move during test, reduce the engine speed immediately and engage the parking brake.
Start the engine. Raise the implement slightly. Apply the service brake. Release the parking brake.
If you are operating the 814K move the transmission control to Third SPEED FORWARD while the service brakes are applied.
If you are operating the 814K gradually increase the engine speed to 1800 RPM while the service brakes are applied. The machine should not move.
Reduce the engine speed to low idle. Move the transmission direction control to the NEUTRAL position. Engage the parking brake. Lower the implement to the ground. Stop the engine.If the machine moved during the test, consult your Cat dealer for a brake inspection. Make any necessary repairs before the machine is returned to operation.Parking Brake Holding Ability Test
Personal injury can result if the machine moves while testing.If the machine begins to move, reduce the engine speed immediately and apply the service brake pedal.
This test is performed when the parking brake is engaged. If the machine begins to move, compare the engine rpm to the engine rpm of a prior test. This will indicate the amount of system deterioration.
Start the engine. Raise the implement slightly. Engage the parking brake.
If you are operating the 814K move the transmission control to Third SPEED FORWARD. Make sure that the autoshift control is in the OFF position.The parking brake indicator light should come on.
Increase the engine speed to 1700 RPM. The machine should not move.
Reduce the engine speed to low idle. Move the transmission direction control to the NEUTRAL position. Lower the implement to the ground. Stop the engine.If the machine moved during the test, consult your Cat dealer for a brake inspection. Make any necessary repairs before the machine is returned to operation.