EDGE-CUTTING 1026744 - Caterpillar

Save information by selecting "Print to File" in the "File" drop-down menu. Set filename to the tool number. Select a save location and press "SAVE" button. This information will be used later in this document.
Repeat Steps 3 to 4 for each item listed in the "Tool Configuration" window. Record Current Totals Procedure
This procedure will allow the technician to record the current totals that are stored in the machine ECM.
Illustration 9 g03741936
Select "Current Totals" from the "Information" drop-down menu. This information will be used later in this document.
Illustration 10 g03741653
Save information by selecting "Print to File" in the "File" drop-down menu. Select a save location and press "SAVE" button. This information will be used later in this document.Input Information Procedure
Once the ECM information is manually recorded from the ""Record Information Procedure"", the current machine ECM can be replaced with the new replacement machine ECM. The following procedures are used to input the machine parameter information manually into the new replacement ECM.Note: Before performing the following procedures, the ""Machine Setup"" procedure in this Special Instruction must be performed.Input Machine Status Configuration Parameters Procedure
This procedure will allow the technician to input the machine configuration parameters manually that are stored in the machine ECM.
Locate file that was saved in Step 4 of ""Record Machine Configuration Parameters Procedure"". Open the saved file.
Illustration 11 g03741574
Click on the "Configuration" icon