EDGE-CUTTING 1073482 - Caterpillar

1073482 EDGE-CUTTING Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1073482
107-3482
1073482

Weight: 156 pounds 70 kg.

Information:

ABRASION RESISTANT MATERIAL N

BOLT HOLE SIZE 28 mm

CHAMFER EDGE

HOLE PATTERN CENTERLINE

HOLE SPACING 152.4 mm

LENGTH 856 mm

NUMBER OF HOLES 6

THICKNESS 45 mm

TUNGSTEN CARBIDE N

WIDTH 254 mm

Buy EDGE-CUTTING 1073482 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Caterpillar CUTTING EDGE (1073482) New Aftermarket By CTP

$309.92

27 Oct 2021
156.3518[70.36] Pounds
US: IronDT

Caterpillar CUTTING EDGE (1073482) New Aftermarket By CTP
CATERPILLAR AFTERMARKET

Show more prices Caterpillar parts

For full view, you need register

Information:

START BY: a. remove camshaftb. remove timing gears and platec. remove flywheel housing The camshaft bearings may be pulled toward the inside or the outside of the cylinder block for removal.1. Use tooling (A), and remove the rear camshaft bearing.2. Remove the remainder of the camshaft bearings with tool (A).Install Camshaft Bearings
Install the camshaft bearings with the oil hole in the bearing in alignment with the oil hole in the block and with the joint of the bearing above a horizontal center line through the bore of the bearing.
1. Install the camshaft bearings in the cylinder block with tools (A) and (B) as follows: a. Install the center bearing to a depth of 287.5 0.8 mm (11.32 .03 in.) [Dimension (A)] from the front surface of the block.b. Install the rear bearing to a depth of 556.8 0.08 mm (21.92 .03 in.) [Dimension (B)] from the front surface of the block.c. Install the front bearing even (flush) with the front surface of the block and no more than 0.5 mm (.02 in.) [Dimension (C)] deep.END BY: a. install flywheel housingb. install timing gears and platec. install camshaft