1099212 EDGE-CUTTING Caterpillar parts
950H, 962H, 966H, 966K, 966M, 972H, 972K, 972M, 980G, 980G II, 980H, 980K, 980M, 982M
Rating:
Alternative (cross code) number:
CA1099212
109-9212
1099212
CA1099212
109-9212
1099212
Weight: 338 pounds 153 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
36.5
mm
CHAMFER
EDGE
HOLE PATTERN
CENTERLINE
HOLE SPACING
485
mm
LENGTH
1450
mm
NUMBER OF HOLES
3
THICKNESS
35
mm
TUNGSTEN CARBIDE
N
WIDTH
406
mm
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1099212 Edge-Cutting (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3406, 3406C, 3406E, C15; WORK TOOL: !; WHEEL-TYPE LOADER: 980G, 980GII, 980H, 980K, 972H, 966M, 950H, 962K, 982M, 962H, 980M, 972K, 950K, 962M, 966H, 966K, 972M, 950M. || Condition: NEW AFTERMARKET || Weight: 371.8 lbs || Dimensions: 35-35-10 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3406, 3406C, 3406E, C15; WORK TOOL: !; WHEEL-TYPE LOADER: 980G, 980GII, 980H, 980K, 972H, 966M, 950H, 962K, 982M, 962H, 980M, 972K, 950K, 962M, 966H, 966K, 972M, 950M. || Condition: NEW AFTERMARKET || Weight: 371.8 lbs || Dimensions: 35-35-10 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1099212 Edge-Cutting (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 371.8 lbs || Dimensions: 10-17.66-62.67 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 371.8 lbs || Dimensions: 10-17.66-62.67 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1099212 Edge-Cutting (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 371.8 lbs || Dimensions: 10-17.66-62.67 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 371.8 lbs || Dimensions: 10-17.66-62.67 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 1099212:
Information:
Installation Procedure For Seals 113-8432 and 113-8433
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-4002 (1) Forcing Bracket 2
B 6V-4001 (1) Forcing Ring 1
C 5S-0003 (1) Nut 4
D 6V-4003 (1) Locator 1
2N-5006 (1) Bolt 2
E - (1) Guide Bolts (5/16 -18 NC x 4 in (101.6mm) Long) 4
F 6V-4977 (1) Installer 1
G 9S-8858 (1) Nut 1
H 8T-3099 (1) Installation 1
J 484-7863 (2) Tool As 1
(1) For installation of seals 113-8432 and 113-8433
(2) For Installation of seals 436-1478 and 436-1479
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Every time that the crankshaft seal is removed from the wear sleeve, a new wear sleeve and crankshaft seal must be installed.
Illustration 1 g00588333
Install adapter (3) on Tool (A).
If the crankshaft seal and the wear sleeve come apart during installation, the crankshaft seal and the wear sleeve must be replaced.
Note: The front crankshaft seal and the wear sleeve cannot be interchanged with the rear crankshaft seal and the wear sleeve.
Do not place engine oil on the crankshaft seal for installation. Lubrication of the crankshaft seal can give a false indication of leakage at a later time.
Place crankshaft seal (2) and wear sleeve (1) on adapter (3). Ensure that the lip of the seal is facing upward.
Install the O-ring seal on adapter (3).
Install Tool (B) on the studs of Tool (A). Install Tool (C) and tighten evenly until the seal is against the bottom of the adapter bore.
Remove Tools (C), (B), and (A) from adapter (3).
Clean the outer surface of the crankshaft with 169-5464 Quick Cure Primer.
Place clean engine oil on the O-ring seal and install the seal on adapter (3). Apply 4C-9507 Retaining Compound to the outside diameter of the crankshaft and to the inside diameter of the wear sleeve.
Illustration 2 g00588568
Install Tool (D) on the end of the crankshaft.
Install Tool (E) in the drive housing. Place adapter (3) on Tool (E) and (D). Ensure that the wear sleeve makes contact with the end of the crankshaft.
Illustration 3 g00588569
Install Tool (B) over the outside diameter of Tool (F) until Tool (B) is against the shoulder of Tool (F).
Install Tool (
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-4002 (1) Forcing Bracket 2
B 6V-4001 (1) Forcing Ring 1
C 5S-0003 (1) Nut 4
D 6V-4003 (1) Locator 1
2N-5006 (1) Bolt 2
E - (1) Guide Bolts (5/16 -18 NC x 4 in (101.6mm) Long) 4
F 6V-4977 (1) Installer 1
G 9S-8858 (1) Nut 1
H 8T-3099 (1) Installation 1
J 484-7863 (2) Tool As 1
(1) For installation of seals 113-8432 and 113-8433
(2) For Installation of seals 436-1478 and 436-1479
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Every time that the crankshaft seal is removed from the wear sleeve, a new wear sleeve and crankshaft seal must be installed.
Illustration 1 g00588333
Install adapter (3) on Tool (A).
If the crankshaft seal and the wear sleeve come apart during installation, the crankshaft seal and the wear sleeve must be replaced.
Note: The front crankshaft seal and the wear sleeve cannot be interchanged with the rear crankshaft seal and the wear sleeve.
Do not place engine oil on the crankshaft seal for installation. Lubrication of the crankshaft seal can give a false indication of leakage at a later time.
Place crankshaft seal (2) and wear sleeve (1) on adapter (3). Ensure that the lip of the seal is facing upward.
Install the O-ring seal on adapter (3).
Install Tool (B) on the studs of Tool (A). Install Tool (C) and tighten evenly until the seal is against the bottom of the adapter bore.
Remove Tools (C), (B), and (A) from adapter (3).
Clean the outer surface of the crankshaft with 169-5464 Quick Cure Primer.
Place clean engine oil on the O-ring seal and install the seal on adapter (3). Apply 4C-9507 Retaining Compound to the outside diameter of the crankshaft and to the inside diameter of the wear sleeve.
Illustration 2 g00588568
Install Tool (D) on the end of the crankshaft.
Install Tool (E) in the drive housing. Place adapter (3) on Tool (E) and (D). Ensure that the wear sleeve makes contact with the end of the crankshaft.
Illustration 3 g00588569
Install Tool (B) over the outside diameter of Tool (F) until Tool (B) is against the shoulder of Tool (F).
Install Tool (
Cat SIS web machinery list:
Parts edge Caterpillar catalog:
966G, 966G II, 966H, 966K, 966M XE, 972G, 972G II, 972H, 972K, 972M XE
966G, 966G II, 966H, 966K, 966M XE, 972G, 972G II, 972H, 972K, 972M XE
374D L, 374F L, 966G, 966G II, 966H, 966K, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
374D L, 374F L, 966G, 966G II, 966H, 966K, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
374D L, 374F L, 966G, 966G II, 966H, 966K, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
950H, 962H, 966C, 966G, 966H, 966K, 966M, 966M XE, 972G, 972H, 972K, 972M, 972M XE
980G II, 980H, 980K, 980M, 982M
966H, 966K, 972G II, 972H, 972K, 972M, D10N, D10R, D10T
950, 950H, 962H, 966H, 972H
950, 950H, 950K, 962H, 962K
950, 950H, 950K, 962H, 962K
980H
1099121
EDGE-CUTTING
980G, 980G II, 980H, 980K
980G, 980G II, 980H, 980K
1099122
EDGE-CUTTING
980G, 980G II, 980H, 980K
980G, 980G II, 980H, 980K
1099124
EDGE-CUTTING
980G, 980G II, 980H, 980K
980G, 980G II, 980H, 980K
1099125
EDGE-CUTTING
980G, 980G II, 980H, 980K
980G, 980G II, 980H, 980K
1099214
EDGE-CUTTING
980G, 980G II, 980H, 980K
980G, 980G II, 980H, 980K
1341748
EDGE
980G, 980G II, 980H, 980K
980G, 980G II, 980H, 980K
2Q7019
EDGE AS
988F II, 988G
988F II, 988G
980G, 980G II, 980H, 980K, 980M, 982M
1386472
EDGE-SEGMENT
980G
980G
1386471
EDGE-SEGMENT
980G
980G
1386470
EDGE-SEGMENT
980G
980G
980G, 980G II, 980H, 980K, 980M, 982M, 988G, 988H, 988K