1122472 EDGE-CUTTING Caterpillar parts
D10R, D8R, D8R II
Rating:
Alternative (cross code) number:
CA1122472
112-2472
1122472
CA1122472
112-2472
1122472
Weight: 320 pounds 145 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
28
mm
CHAMFER
EDGE
HOLE PATTERN
CENTERLINE
HOLE SPACING
152.4
mm
LENGTH
1353.2
mm
NUMBER OF HOLES
9
THICKNESS
45
mm
TUNGSTEN CARBIDE
N
WIDTH
330
mm
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 1122472 Ground Engaging Tools Cutting Edge
CTP For Ground Engaging Tools || Longer tips || Sold in each
CTP For Ground Engaging Tools || Longer tips || Sold in each
CTP 1122472 Ground Engaging Tools Cutting Edge
CTP For Ground Engaging Tools || Longer tips || Sold in each
CTP For Ground Engaging Tools || Longer tips || Sold in each
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01343996
Typical example
Loosen clamp (2) and remove hose (3) from breather tube (1). Withdraw hose (3) from clip (4) and remove the hose.
Illustration 2 g01346677
Remove bolt (6) and remove breather tube (1) from valve mechanism cover (5).
Remove O-ring seal (7) from breather tube (1). Disassembly Procedure
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 3 g01347094
Remove plastic cover (8) from valve mechanism cover (5).
Remove screws (9). Remove plate (10).
Remove assembly of diaphragm (11) and the cap (12). Remove spring (13). Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 4 g01347094
Ensure that all components of the crankcase breather are clean and free from damage. Replace any components that are damaged.
Install spring (13). Install assembly of diaphragm (11) and cap (12).
Position plate (10) on valve mechanism cover (5) and install screws (9).
Use Tooling (A) to tighten screws (9) to a torque of 1.3 N m (12 lb in).
Install plastic cover (8) to valve mechanism cover (5). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 5 g01346677
Install a new O-ring seal (7) to breather tube (1).
Install breather tube (1) to valve mechanism cover (5). Install bolt (6) and tighten the bolt to a torque of 9 N m (80 lb in).
Illustration 6 g01343996
Typical example
Connect hose (3) to breather tube (1). Tighten clamp (2). Install hose (3) into clip (4).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01343996
Typical example
Loosen clamp (2) and remove hose (3) from breather tube (1). Withdraw hose (3) from clip (4) and remove the hose.
Illustration 2 g01346677
Remove bolt (6) and remove breather tube (1) from valve mechanism cover (5).
Remove O-ring seal (7) from breather tube (1). Disassembly Procedure
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 3 g01347094
Remove plastic cover (8) from valve mechanism cover (5).
Remove screws (9). Remove plate (10).
Remove assembly of diaphragm (11) and the cap (12). Remove spring (13). Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 4 g01347094
Ensure that all components of the crankcase breather are clean and free from damage. Replace any components that are damaged.
Install spring (13). Install assembly of diaphragm (11) and cap (12).
Position plate (10) on valve mechanism cover (5) and install screws (9).
Use Tooling (A) to tighten screws (9) to a torque of 1.3 N m (12 lb in).
Install plastic cover (8) to valve mechanism cover (5). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 5 g01346677
Install a new O-ring seal (7) to breather tube (1).
Install breather tube (1) to valve mechanism cover (5). Install bolt (6) and tighten the bolt to a torque of 9 N m (80 lb in).
Illustration 6 g01343996
Typical example
Connect hose (3) to breather tube (1). Tighten clamp (2). Install hose (3) into clip (4).
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
D8N, D8R
844, 844H, 844K, D8N, D8R, D8R II, D8T, D9N, D9R
990, 990 II, D10T, D8N, D8R, D8R II, D8T
631G, 637E, 637G, 844, 844H, 844K, D10T, D8N, D8R, D8R II, D8T
D8N, D8R, D8R II, D8T
966H, 966K, 972G II, 972H, 972K, 972M, D10N, D10R, D10T
966H, D10N, D10R, D10T
D8R, D8R II, D8T
D10N, D10R, D10T
854G, 854K, D10N, D10R, D10T, D10T2
854G, 854K, D10N, D10R, D10T, D10T2
854G, D10N, D10R, D10T, D10T2
D10R, D8R, D8R II
854G, D11R, D9L
D11N, D11R
6Y0019
EDGE-CUTTING
D11R
D11R
6Y0018
EDGE-CUTTING
D11R
D11R
D8R, D8R II, D8T
D11N, D11R
1457846
EDGE-CUTTING
D7R, D7R II
D7R, D7R II
854G, 854K, D10N, D10R, D10T, D10T2
854G, 854K, D10N, D10R, D10T, D10T2
D7G, D7R
D10N, D10R, D10T