EDGE-CUTTING 1122475 - Caterpillar

1122475 EDGE-CUTTING Caterpillar parts D10R, D8R, D8R II

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1122475
112-2475
1122475

Weight: 215 pounds 97 kg.

Information:

ABRASION RESISTANT MATERIAL N

BOLT HOLE SIZE 28 mm

CHAMFER EDGE

HOLE PATTERN CENTERLINE

HOLE SPACING 152.4 mm

LENGTH 900 mm

NUMBER OF HOLES 6

THICKNESS 45 mm

TUNGSTEN CARBIDE N

WIDTH 330 mm

Buy EDGE-CUTTING 1122475 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Invacare Part: CROSSBAR SEAT FRAME 16-20W 9153647692

$25.60

14 Nov 2019

-: -

Invacare Part: CROSSBAR SEAT FRAME 16-20W 9153647692
Invacare Corporation 1122475 Invacare Part: CROSSBAR SEAT FRAME 16-20W 9153647692

Show more prices Caterpillar parts

Number on catalog scheme: 4

Caterpillar 1122475 Parts scheme EDGE-CUTTING

For full view, you need register

Compatible equipment models: 1122475:

TRACK-TYPE TRACTOR D10R D8R D8R II Caterpillar

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01368193
Typical example
Remove bolts (2) and remove breather tube (4) from valve mechanism cover (1).
Remove O-ring seal (3) and seal (5) from breather tube (4). Disassembly Procedure
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 2 g01347463
Typical example
Remove plastic cover (6) from valve mechanism cover (1).
Remove screws (7). Remove plate (8).
Remove assembly of diaphragm (9) and the cap (10). Remove spring (11). Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 3 g01347463
Typical example
Ensure that all components of the crankcase breather are clean and free from damage. Replace any components that are damaged.
Install spring (11). Install assembly of diaphragm (10) and cap (9).
Position plate (8) on valve mechanism cover (1) and install screws (7).
Use Tooling (A) to tighten screws (7) to a torque of 1.3 N m (12 lb in).
Install plastic cover (6) to valve mechanism cover (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g01368193
Typical example
Install new O-ring seals (3) and (5) to breather tube (4).
Install breather tube (4) to valve mechanism cover (1). Install bolts (2) and tighten the bolt to a torque of 9 N m (80 lb in).