EDGE GP-CUTTING 1270718 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01253311
Remove bolts (2), (3), and (4). Remove adapter (1).
Illustration 2 g01253313
Remove bolts (7). Remove elbow (6) and tube (5).
Remove the flange and tube (8) from the engine oil cooler bonnet.
Illustration 3 g01775596
Attach Tooling (A) and a suitable lifting device to engine oil pump (9). The weight of engine oil pump (9) is approximately 39 kg (86 lb).
Remove bolts (10) and (11).
Remove engine oil pump (9).