EDGE-CUTTING 1359349 - Caterpillar

1359349 EDGE-CUTTING Caterpillar parts 24H, 24M

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1359349
135-9349
1359349

Weight: 485 pounds 220 kg.

Information:

ABRASION RESISTANT MATERIAL N

BOLT HOLE SIZE 28 mm

CHAMFER EDGE

HOLE PATTERN OFFSET

HOLE SPACING 152.4 mm

LENGTH 1216.8 mm

NUMBER OF HOLES 9

THICKNESS 60 mm

TUNGSTEN CARBIDE N

WIDTH 406 mm

Buy EDGE-CUTTING 1359349 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 1359349:

MOTOR GRADER 24H 24M Caterpillar

Number on catalog scheme: 2

Caterpillar 1359349 Parts scheme EDGE-CUTTING

For full view, you need register

Information:

Recommendations
Customers Complaint
Obtain as much information from the customer as possible. Investigate any written information that is available and document any information that is gathered from the customer. The following information is of particular importance:
Indicate if an event code was logged.
Indicate if a diagnostic code was logged. Also, record the codes that are logged.
Indicate the symptoms of engine operation that are present.
Indicate the engine software part number.Be as specific as possible.Cause of Failure
Comments on the cause of failure include the number of diagnostic codes that were logged. Comments also indicate if the code was an active code. Indicate the source of the problem. Also indicate the method that was used to discover the problem. Examples of the methods that were used to discover the problem could be one of the following methods:
A specific procedure in the manual was followed.
A visual inspection indicated wire abrasion on the engine harness.Be as specific as possible.Repair Procedure
Comments on the repair procedure include the following types of information:
The wiring harness was repaired.Be as specific as possible.