EDGE GP-BIT & CUTTING 1400934 - Caterpillar

Illustration 1 g02306674
(1) Camshaft gear (A) Diameter of camshaft bearing journal ... 77.850 0.025 mm (3.0650 0.0010 inch)The lobe on the camshaft for the injector has the most lift when the cam is at zero degrees of rotation. ... 14.21529 0.1 mm (0.55966 0.00394 inch)The lobe on the camshaft for the injector has zero lift through the given rotation. ... 77 degrees to 256 degreesWhen the injector lobe has an opening lift height of 5.01167 0.038 mm (0.19731 0.00150 inch), the camshaft should have an angle of rotation. ... 35 degreesThe lobe on the camshaft for the inlet has the most lift when the cam is at zero degrees of rotation. ... 12.60667 0.1 mm (0.49632 0.00394 inch)The lobe on the camshaft for the inlet has zero lift through the given rotation. ... 78 degrees to 284 degreesWhen the inlet lobe has an opening lift height of 5.13544 0.2 mm (0.20218 0.00787 inch), the camshaft should have an angle of rotation. ... 32 degreesThe lobe on the camshaft for the exhaust has the most lift when the cam is at zero degrees of rotation. ... 9.41655 0.1 mm (0.37073 0.00394 inch)The lobe on the camshaft for the exhaust has zero lift through the given rotation. ... 83 degrees to 278 degreesWhen the exhaust lobe has an opening lift height of 5.56895 0.2 mm (0.21925 0.00787 inch), the camshaft should have an angle of rotation. ... 32 degrees
Illustration 2 g02266638 (2) The torque on the four bolts is ... 35 8 N m (26 6 lb ft)