EDGE-CUTTING 1517476 - Caterpillar

Illustration 69 g01154689
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Remove ring (19).
Illustration 70 g01151331
Install spring (20).
Illustration 71 g01154689
Install ring (19).
Illustration 72 g01151192
Install race (13), thrust bearing (12), and race (14).
Illustration 73 g01150597
Install seals (61) and (62).
Illustration 74 g01151386
Install piston (15). Note: Position piston (15) so that the hole in piston (15) is in the twelve o'clock position to the machine.
Illustration 75 g01151214
Install piston (11).
Illustration 76 g01151216
Install springs (6).
Illustration 77 g01151218
Install springs (5).
Illustration 78 g01137027
Install seal (10) to spool (9).
Illustration 79 g01137000
Install spool (9), O-ring seal (8), and spring (7).
Illustration 80 g01136995
Install springs (5) and (6).
Illustration 81 g01136993
Install seal (4) to housing (3).
Illustration 82 g01136987
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Position housing (3) and install bolts (2). Tighten bolts (2) evenly to a torque of 80 N m (59 lb ft). Install plug (1).
Fill the transmission with oil. Refer to Operation and Maintenance Manual, "Transmission Oil - Change". End By:
Install the transmission. Refer to Disassembly and Assembly, "Transmission - Install".