EDGE AS. 1747952 - Caterpillar

1. Remove bolts (2) that hold cushion (1) to the air conditioner and heater unit. Remove four screws (3) that hold the controls to the unit. 2. Push light (4) out of the unit. Pull the light and control out of the unit. 3. Put identification marks on the wires going to the switches and the cables going to the controls for correct installation. Remove the wires and the control cables. Remove controls (5).4. Connect the wires to the switches. Install the cables on the controls.5. Install the controls and the four screws that hold it. Snap the light into position.6. Install the cushion and the two bolts that hold it.