EDGE-CUTTING 1U0600 - Caterpillar

The initial valve lash adjustment on new engines, rebuilt engines, or remanufactured engines is recommended at the first scheduled oil change. The adjustment is necessary due to the initial wear of the valve train components and to the seating of the valve train components.The maintenance is recommended by Caterpillar as part of a lubrication and preventive maintenance schedule to help provide maximum engine life.Note: Only qualified service personnel should perform this maintenance. For procedures on adjusting the valve lash and adjusting the valve bridge, see Systems Operation/Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust". Consult your Cat dealer for assistance.Note: For information on adjusting the unit injector refer to Testing and Adjusting, RENR1232, Unit Injector Adjustment.
Ensure that the engine cannot be started while this maintenance is being performed. To help prevent possible injury, do not use the starting motor to turn the flywheel.Hot engine components can cause burns. Allow additional time for the engine to cool before measuring/adjusting valve lash clearance.