1U2211 EDGE-CUTTING Caterpillar parts
D5H, D6M, D6N
Rating:
Alternative (cross code) number:
CA1U2211
1U-2211
1U2211
CA1U2211
1U-2211
1U2211
Weight: 84 pounds 38 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
21
mm
CHAMFER
EDGE
HOLE PATTERN
CENTERLINE
HOLE SPACING
152.4
mm
LENGTH
1395.2
mm
NUMBER OF HOLES
9
THICKNESS
19
mm
TUNGSTEN CARBIDE
N
WIDTH
203.2
mm
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$108.69
11 Feb 2020
85.1866180368[38.25] Poun
-: -
CTP Caterpillar Cutting Edge Replacement Suitable for Caterpillar D5 Lgp (1u2211) Aftermarket
$174.81
01 Mar 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Edge-Cutting 1U2211 New
$189.23
01 Mar 2019
COSTEX: COSTEX
EDGE-CUTTING
Number on catalog scheme:
1
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3263 Thread Lock Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01292465Note: The rear face of cover (3) and the front face of the housing must be clean.
Inspect the condition of the gasket. Replace the gasket, if necessary.
Position the gasket and cover (3) on the front housing.
Install studs (2). Note: Bolt (4) is a through bolt. Apply Tooling (A) to the threads prior to installation.
Install bolt (4).
Install bolts (1). End By:
Install the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Install the fan drive mounting group. Refer to Disassembly and Assembly, "Fan Drive Mounting Group - Remove and Install".
Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3263 Thread Lock Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01292465Note: The rear face of cover (3) and the front face of the housing must be clean.
Inspect the condition of the gasket. Replace the gasket, if necessary.
Position the gasket and cover (3) on the front housing.
Install studs (2). Note: Bolt (4) is a through bolt. Apply Tooling (A) to the threads prior to installation.
Install bolt (4).
Install bolts (1). End By:
Install the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Install the fan drive mounting group. Refer to Disassembly and Assembly, "Fan Drive Mounting Group - Remove and Install".
Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
8E9380
EDGE GP-BIT & CUTTING
527, D5H, D5H XL, D5HTSK II, D5R LGP, D6M, D6N, D6N LGP
527, D5H, D5H XL, D5HTSK II, D5R LGP, D6M, D6N, D6N LGP
9U8079
EDGE GP
D5H XL, D5R LGP, D6M, D6N, D6N LGP
D5H XL, D5R LGP, D6M, D6N, D6N LGP
1774549
EDGE GP-BIT & CUTTING
D6M, D6N
D6M, D6N
321C, 321D LCR, D5H XL, D5R LGP, D6H, D6M, D6N, D6N LGP, D6R, D6R II, D6T XL
D5H XL, D5R LGP, D6M, D6N, D6N LGP, D6R II
527, D5H, D5H XL, D5HTSK II, D5R LGP, D6M, D6N, D6N LGP
D5H, D5R LGP, D6M, D6N, D6N LGP
D5H, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 XL
1774550
EDGE-CUTTING
D6M, D6N
D6M, D6N
4T0731
EDGE-CUTTING
527, D5H
527, D5H
321C, 321D LCR, 930K, D5H
D7H, D7R, D7R II, D7R XR
631E, 631G, 637E, 637G, 844, 844H, 844K, D8N, D8R, D8R II
7T9127
EDGE-CUTTING
988B, 988F, 988F II, D8N, D8R, D8R II
988B, 988F, 988F II, D8N, D8R, D8R II
D8N, D8R, D8R II
844, 844H, 844K, D8N, D8R, D8R II, D9N, D9R, D9T
D8N, D8R, D8R II
120K, 120K 2, 120M, 12K, 12M, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 3, 140M 3 AWD, 160K, 160M, 160M 3, 160M 3 AWD, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D6H
D5H, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 XL
6J1406
EDGE-CUTTING
5S, 6A, 6S, D6D, D6E, D6E SR, D6G SR
5S, 6A, 6S, D6D, D6E, D6E SR, D6G SR
D5H, D5R LGP, D6M, D6N, D6N LGP
527, D5H, D5H XL, D5HTSK II, D5R LGP, D6M, D6N, D6N LGP