EDGE-END 2331852 - Caterpillar

Illustration 1 g00566276
Illustration 2 g00686961
View A-A
Illustration 3 g00566145
Tightening sequence (1) StudApply 5P-3931 Anti-Seize Compound to the threads of the studs that engage the locknuts. Tighten the studs in the cylinder head to the following torque. ... 35 5 N m (26 4 lb ft) (2) Manifold endsApply engine oil to the female ends of the manifolds before assembly. Apply 2P-2333 High Temperature Sealer to the male ends of the manifolds before assembly. Remove excess sealer from the assembled joint. (3) Locknut Tighten the locknuts in the numerical sequence that is shown in Illustration 3 to the following torque. ... 38 5 N m (28 4 lb ft)