EDGE AS 2392784 - Caterpillar

Illustration 1 g00101796
Unlatch the engine hood and raise the engine hood.
Illustration 2 g00102869
Unlock the priming pump plunger and operate the priming pump plunger until a resistance is felt.
Push in the priming pump plunger and tighten the priming pump plunger by hand.
Crank the engine. If the engine does not start or the engine misfires, additional priming is required. Also if the engine emits smoke, additional priming is required.
If the engine starts but the engine runs rough, continue to run the engine at low idle. Run the engine at low idle until the engine runs properly.
Check the fuel system for leaks. Stop the engine.
Close the engine hood and latch the engine hood.