EDGE-CUTTING 2419472 - Caterpillar

Illustration 1 g00289596
(1) Torque for two bolts ... 41 7 N m (30 5 lb ft) (2) 112-8794 Pad Thickness of one brake pad ... 3.1 + 0.3 - 0.0 mm (.12 + .01 - .00 inch) Thickness of friction material ... 1.10 + 0.20 - 0.00 mm (.043 + .008 - .000 inch)Note: Replace the brake pads when the 0.5 mm (.02 inch) grooves are gone from the friction material. (3) 112-8795 Pad Thickness of one brake pad ... 4.2 + 0.3 - 0.0 mm (.17 + .01 - .00 inch) Thickness of friction material ... 1.10 + 0.20 - 0.00 mm (.043 + .008 - .000 inch)Note: Replace the brake pads when the 0.5 mm (.02 inch) grooves are gone from the friction material. (4) Torque for plug ... 160 20 N m (120 15 lb ft)Adjustment and Installation Procedure
Illustration 2 g00289733
Verify that lever (8) is installed in the support (7). The placement is shown in Illustration 1.
Install lever (6) to the shaft of lever (8) .
Place lever (8) in the vertical position. Place the square edge (D) on the housing. The placement is shown in Illustration 2. Align lever (8) with the square edge (D) .
Adjust lever (6) on the shaft in order to achieve dimension (C). Dimension (C) is 35 mm (1.4 inch).