EDGE-CUTTING 2435571 - Caterpillar

Illustration 1 g06223861
DEF Level Normal
Inducement Strategy for DEF Level
If multiple warnings are present in the system, the most important problem is shown first. Press the right key or press the left key to view all the warnings that are present in the machine. If no keys are pressed within 5 seconds, the display will return to the most important problem.
Illustration 2 g06223864
DEF Level Low
If the DEF level falls below 19%, "DEF Level Low" message will be displayed on the monitor. To avoid further inducements, turn the key to the OFF position and add DEF to the DEF tank.
Illustration 3 g06223865
DEF Level Low and Emission Fault
If the DEF level falls below 12.5%, a level 1 inducement event will occur. a “DEF Level Low” message and an “Emission Fault” message will appear on the monitor.
Illustration 4 g06223866
DEF Level Low, Emission Fault, and Flashing Action Lamp
If the DEF level is below 6%, a level 2 inducement event will occur. a “DEF Level Low” message and an “Emission Fault” message will appear on the monitor. The action lamp on the monitor will flash. If the ECM is configured to "Reduced Performance" and the DEF level has reached 0%, the machine will be limited to 75% torque.
Illustration 5 g06223883
DEF Level Low, Emission Fault, Flashing Action Lamp, and Audible Alarm
If the ECM is configured to "Reduced Performance" and the DEF tank has been emptied of all DEF, the engine will be