2551505 EDGE-CUTTING Caterpillar parts
D3K XL, D4K XL, D5K LGP
Rating:
Alternative (cross code) number:
CA2551505
255-1505
2551505
CA2551505
255-1505
2551505
Weight: 39 pounds 17 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
21
mm
CHAMFER
EDGE
HOLE PATTERN
CENTERLINE
HOLE SPACING
152.4
mm
LENGTH
980.5
mm
NUMBER OF HOLES
6
THICKNESS
16
mm
TUNGSTEN CARBIDE
N
WIDTH
203
mm
TRACK-TYPE TRACTOR,
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 271 - Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02137495
Remove bolts (2) and plate assembly (1).
Illustration 2 g02137533
Disconnect hose assemblies (3) from shuttle valve (4).
Remove bolts (5) and shuttle valve (4).
Illustration 3 g02137554
Remove fitting (7), O-ring seal (8), and ball (9). Repeat for the remaining fittings (6).Installation Procedure
Install shuttle valve (4) in the reverse order of removal.
Apply Tooling (A) to the threads of bolts (2).
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 271 - Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02137495
Remove bolts (2) and plate assembly (1).
Illustration 2 g02137533
Disconnect hose assemblies (3) from shuttle valve (4).
Remove bolts (5) and shuttle valve (4).
Illustration 3 g02137554
Remove fitting (7), O-ring seal (8), and ball (9). Repeat for the remaining fittings (6).Installation Procedure
Install shuttle valve (4) in the reverse order of removal.
Apply Tooling (A) to the threads of bolts (2).
Caterpillar SIS machinery equipment:
Caterpillar SIS
D5K XL & LGP Track Type Tractors JLF00001-UP (MACHINE) POWERED BY C4.4 Engine »
255-1505
EDGE-CUTTING
D3K XL & LGP Track Type Tractors FFF00001-UP (MACHINE) POWERED BY C4.4 Engine »
255-1505
EDGE-CUTTING
D4K XL & LGP Track Type Tractor MMM00001-UP (MACHINE) POWERED BY C4.4 Engine »
255-1505
EDGE-CUTTING
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
2551428
EDGE GP-BIT & CUTTING
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
2551472
EDGE GP-BIT & CUTTING
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
2551426
EDGE GP-BIT & CUTTING
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
2551501
EDGE GP-BIT & CUTTING
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
1792897
EDGE GP-BIT & CUTTING
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL
1406836
EDGE-CUTTING
311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 313B, 313D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 313B, 313D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
4T6232
EDGE-CUTTING
D3B, D3C II, D3C III, D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3B, D3C II, D3C III, D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
1577338
EDGE-CUTTING
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL
2551429
EDGE-CUTTING
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
2551474
EDGE-CUTTING
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
3310162
EDGE-CUTTING
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
2995360
EDGE GP-CUTTING
928HZ
928HZ
2948236
EDGE GP-BIT & CUTTING
D6R III, D6T, D6T LGP, D6T XL
D6R III, D6T, D6T LGP, D6T XL
2194270
EDGE GP-BIT & CUTTING
D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL
D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL
2971704
EDGE GP-BIT & CUTTING
D6K LGP
D6K LGP
2337140
EDGE GP-CUTTING
120M, 12M, 140M, 160M
120M, 12M, 140M, 160M
3432215
EDGE AS-BASE
993K
993K
3357166
EDGE AS-BASE
993K
993K