EDGE-SEGMENT 2571817 - Caterpillar

2571817 EDGE-SEGMENT Caterpillar parts 988H

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2571817
257-1817
2571817

Weight: 146 pounds 66 kg.

Buy EDGE-SEGMENT 2571817 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

£257.99

07 Sep 2017
3.79[1.35] pounds
VAN WEZEL GMBH: VAN WEZEL GMBH

Van Wezel 2571817 Exterior Mirrors

This part in 1 request: Show. This information for suppliers only!

#1426291 257-1817

2024-09-18

Number on catalog scheme:

Caterpillar 2571817 Parts scheme EDGE-SEGMENT

For full view, you need register

Compatible equipment models: 2571817:

WHEEL LOADER 988H Caterpillar

Information:

Illustration 1 g01411580
(1) Bore in rocker arm bushing for shaft ... 20.011 to 20.094 mm (0.7878 to 0.7911 inch) (2) Diameter of rocker arm shaft ... 19.966 to 19.984 mm (0.7861 to 0.7868 inch)Clearance of rocker arm bushing and shaft Minimum ... 0.027 mm (0.0011 inch) Maximum ... 0.128 mm (0.0050 inch) Repair limit ... 0.15 mm (0.006 inch)
Illustration 2 g01411576
(3) Align the oil holes in rocker arm bushing (4) with the oil holes in the rocker arm when the rocker arm bushing is replaced.
Illustration 3 g01411581
Position the rocker shaft brackets (7) and mounting bolts. (5) Tighten the long bolt to the following torque. ... 10 to 20 N m (7 to 15 lb ft) (6) Tighten the short bolt to the following torque. ... 10 to 20 N m (7 to 15 lb ft)
Illustration 4 g01411582
Valve lash adjustmentNote: Turn the crankshaft until the timing mark on the crankshaft pulley is aligned with the pointer on the timing gear housing in order to adjust the valve lash. Both the No. 1 inlet valve and the No. 1 exhaust valve pushrods must not be in tension against the rocker arms.Valve lash Inlet ... 0.25 mm (0.010 inch) Exhaust ... 0.25 mm (0.010 inch)