EDGE-SEGMENT 2637545 - Caterpillar

Installation Procedure
Illustration 1 g01093769
Install thermostat (10) and resistor (11) .
Install screws (9) .
Install blower motor (7) .
Connect harness assemblies (8) .
Illustration 2 g01093768
Install evaporator (6) .
Illustration 3 g01093766
Connect air conditioner hose assemblies (4) .
Connect heater hose assemblies (5) .
Illustration 4 g02010680
Install the right side console. Refer to Disassembly and Assembly, "Cab - Install" in order to reference the location of bolts and harnesses for installation.
Illustration 5 g01093765
Install cover (3) .
Install screws (1) and the clips.
Install air filter (2) .
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Charge refrigerant into the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct procedure and tools.
Fill the engine coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove".