EDGE-CUTTING 2777036 - Caterpillar

1. Ensure the O-ring seal is in position on the flange assembly.2. Put secondary steering pump (1) in position on the transmission. 3. Install four nuts (5) and the washers that hold the secondary steering pump to the transmission.4. Install the O-ring seal in hose assembly (3). Connect hose assembly (3) to manifold (4).5. Install the O-ring seal in hose assembly (2). Connect hose assembly (2) to secondary steering pump (1).6. Fill the steering tank to the correct level. Refer to Operation and Maintenance Manual for the machine that is being serviced. End By:a. Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.