EDGE-CUTTING 3456752 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 1P-0520 Driver Gp 1 Start By:
Remove the axle housing and the wheel flange.
Illustration 1 g01023873
Remove retaining ring (1) and ring gear hub (2) from ring gear (3).
Illustration 2 g01023874
Remove seal (4) from wheel flange (7). Use Tooling (B) and a suitable hammer to remove bearing cup (5). Remove spacer (6). Use Tooling (B) and a suitable hammer to remove bearing cup (8).
Illustration 3 g01023875
Remove bearing cone (9) and seal (10) from pin assembly (11). Repeat for the other pin assembly.
Illustration 4 g01023881
Remove seal (12) from knuckle (13).
Illustration 5 g01038749
Remove bearing cone (14) from knuckle (13).
Illustration 6 g01023876
Use Tooling (A) and a suitable hammer to remove the bushing from knuckle (13).