3483103 EDGE AS Caterpillar parts
324E L, 324E LN, 329E L, 329E LN, 336E LN
Rating:
Alternative (cross code) number:
CA3483103
348-3103
3483103
CA3483103
348-3103
3483103
EXCAVATOR,
Number on catalog scheme:
3
For full view, you need register
Information:
13. Install eight stud stabilizer O-ring seals (22). 14. Install O-ring seal (23) on connector plate (24). Put 2S3230 Lubricant on the O-ring seal to hold it in place. 15. Use the reference marks made on the pump assembly and install connector plate (25). 16. Be sure the snap ring is in coupling (26) and install the coupling on the pump drive shaft.17. Install eight stud stabilizer O-ring seals (27). 18. Install O-ring seal (29) on bearing plate (28). Put 2S3230 Lubricant on the O-ring seal to hold it in place. 19. Use the reference marks made on the pump assembly and install bearing plate (28).20. Install eight stud stabilizer O-ring seals (30). Install O-ring seal (31). 21. Put isolation plate (32), backup ring (33), O-ring seal (34) and retainer ring (35) around the bearings in bearing plate (28).22. Install isolation plate (32) on the inlet side of the pump. Install the isolation plate with the groove up. 23. Put pressure plate (36) in position on bearing plate (28). Install the pressure plate so the rounded trap slot side of the pressure plate will contact the pump gears and the slot is on the outlet side of the pump.24. Be sure the two dowels are in place in bearing plate (28). 25. Use the reference marks made on the pump assembly and install pump body (37) on gear plate (28). Be sure the pump body is engaged with the dowels and components installed in Steps 21 and 22.
Do not hit pump body (37) to put it in position. If pump body (37) will not contact gear plate (28), check for contact with components installed in Steps 21 and 23.
26. Put clean hydraulic oil inside pump body
Do not hit pump body (37) to put it in position. If pump body (37) will not contact gear plate (28), check for contact with components installed in Steps 21 and 23.
26. Put clean hydraulic oil inside pump body
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
3704401
EDGE AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312E, 314D CR, 314D LCR, 314E LCR, 316E L, 320D, 320D L, 320E, 320E L, 320E LN, 324D, 324D L, 324E, 324E L, 324E LN, 325D L, 329D, 329E, 329E L, M313...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312E, 314D CR, 314D LCR, 314E LCR, 316E L, 320D, 320D L, 320E, 320E L, 320E LN, 324D, 324D L, 324E, 324E L, 324E LN, 325D L, 329D, 329E, 329E L, M313...
4365491
EDGE-CUTTING
311F LRR, 312D L, 312D2, 312E L, 314D CR, 314E CR, 314E LCR, 324E L, 329E L, 336D, 336D2, 336E L, 336E LH
311F LRR, 312D L, 312D2, 312E L, 314D CR, 314E CR, 314E LCR, 324E L, 329E L, 336D, 336D2, 336E L, 336E LH
2794107
EDGE AS
320C, 320D, 320D L, 320D LRR, 324D, 324D L, 324E L, 325D L, 329D, 329D L, 329E L, 330D L, 336D L, 336E L, 336E LH
320C, 320D, 320D L, 320D LRR, 324D, 324D L, 324E L, 325D L, 329D, 329D L, 329E L, 330D L, 336D L, 336E L, 336E LH
2794106
EDGE AS
320C, 320D, 320D L, 320D LRR, 322C, 324D, 324D L, 324E L, 325B L, 325C, 325D L, 329D, 329D L, 329E L, 330C L, 330D L, 336D L, 336D LN, 336E L, 336E LH, 336F L
320C, 320D, 320D L, 320D LRR, 322C, 324D, 324D L, 324E L, 325B L, 325C, 325D L, 329D, 329D L, 329E L, 330C L, 330D L, 336D L, 336D LN, 336E L, 336E LH, 336F L
2765895
EDGE AS
320D, 324D L, 324E L, 325D L, 329D L, 329E L
320D, 324D L, 324E L, 325D L, 329D L, 329E L
3719052
EDGE-CUTTING
323D L, 323D2 L, 324E LN, 329E LN
323D L, 323D2 L, 324E LN, 329E LN
3483100
EDGE AS
324E LN, 329E LN, 336E LN
324E LN, 329E LN, 336E LN
4223837
EDGE AS
324E LN
324E LN
3016966
EDGE AS
324D L, 329D L, 329D LN, 336D L, 336D LN
324D L, 329D L, 329D LN, 336D L, 336D LN
2753257
EDGE AS
324D L, 329D L, 329D LN, 336D LN
324D L, 329D L, 329D LN, 336D LN
2950487
EDGE AS
324D L, 329D L, 329D LN, 336D L, 336D LN
324D L, 329D L, 329D LN, 336D L, 336D LN
3006198
EDGE AS
324D L, 329D L, 329D LN, 336D L, 336D LN
324D L, 329D L, 329D LN, 336D L, 336D LN
2950443
EDGE AS
324D L, 329D L, 329D LN, 336D L, 336D LN
324D L, 329D L, 329D LN, 336D L, 336D LN
2924035
EDGE AS
324D L, 329D L, 329D LN, 336D L, 336D LN
324D L, 329D L, 329D LN, 336D L, 336D LN
3719052
EDGE-CUTTING
323D L, 323D2 L, 324E LN, 329E LN
323D L, 323D2 L, 324E LN, 329E LN
3719051
EDGE-CUTTING
324E LN, 329E LN
324E LN, 329E LN
3719049
EDGE AS
324E LN, 329E LN
324E LN, 329E LN
4365521
EDGE-CUTTING
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
4365543
EDGE
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
4365542
EDGE
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
324E L, 329E L, 336D, 336D2, 336E L, 336E LH