EDGE-CUTTING 3710964 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1
B 189-0408 Shackle 4
Illustration 1 g01826654
Attach Tooling (B) and a suitable lifting device into Locations (X) in order to remove cab (8). The weight of cab (8) is approximately 685 kg (1510 lb).
Position cab (8) and install pins (10).
Install rails (9) and remove Tooling (B) and the suitable lifting devices.
Illustration 2 g01825593
Install bolts (7). Tighten bolts (7) to a torque of 800 100 N m (590 74 lb ft).
Illustration 3 g01825553
Connect hose assemblies (5) and harness assemblies (4). Install brackets (6).
Illustration 4 g01825473
Install cover (3).
Illustration 5 g01825458
Connect hose assemblies (1) and (2).
Illustration 6 g01623320
Remove Tooling (A) from the hydraulic tank . End By:
Remove the retaining cable and lower the truck body. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".