3764825 EDGE AS Caterpillar parts
315D L, 316E L, 318E L, M315D, M316D, M317D 2
Rating:
Alternative (cross code) number:
CA3764825
376-4825
3764825
CA3764825
376-4825
3764825
Weight: 242 pounds 109 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 3764825:
Information:
TARGET="_parent">Hydraulic System Oil Filter (Return) - Replace
Swing Drive Oil - Change
Every 250 Service Hours
Engine Oil Sample - Obtain
Every 250 Service Hours for Machines Used in Severe Applications
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Every 250 Service Hours or Monthly
Condenser (Refrigerant) - Clean
Swing Bearing - Lubricate
Swing Drive Oil Level - Check
Every 250 Service Hours of Partial Hammer Use (50% of Service Hours)
Oil Filter (Hydraulic Hammer) - Replace
Every 250 Service Hours of Continuous Hammer Use
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Pilot) - Replace
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Final Drive Oil Sample - Obtain
Hydraulic System Oil Sample - Obtain
Pump Coupling Oil Level - Check
Swing Drive Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Belt - Inspect/Adjust/Replace
Boom and Stick Linkage - Lubricate
Cooling System Coolant Sample (Level 1) - Obtain
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Fuel Tank Strainer - Clean
Hydraulic System Filter Element (Fine Filtration) - Replace
Every 500 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Pilot) - Replace
Every 600 Service Hours of Continuous Hammer Use
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Every 1000 Service Hours or 6 Months
Battery - Clean
Battery Hold-Down - Tighten
Boom and Stick Linkage - Lubricate
Final Drive Oil Level - Check
Fuel Tank Cap Filter - Replace
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Pilot) - Replace
Rollover Protective Structure (ROPS) - Inspect
Swing Drive Oil - Change
Every 1000 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Every 2000 Service Hours or 1 Year
Engine Valve Lash - Check
Final Drive Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Receiver Dryer (Refrigerant) - Replace
Swing Gear - Lubricate
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 18 Months
Hydraulic System Oil - Change
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 5000 Service Hours
ARD Spark Plug - Clean
Diesel Exhaust Fluid Filter - Replace
Diesel Exhaust Fluid Injector - Replace
Diesel Particulate Filter - Clean
Fuel Priming Pump - Replace
Every 5000 Service Hours or 3 Years
Hydraulic System Oil (If Equipped with Fine Filtration Filter) - Change
Pump Coupling Oil - Change
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Swing Drive Oil - Change
Every 250 Service Hours
Engine Oil Sample - Obtain
Every 250 Service Hours for Machines Used in Severe Applications
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Every 250 Service Hours or Monthly
Condenser (Refrigerant) - Clean
Swing Bearing - Lubricate
Swing Drive Oil Level - Check
Every 250 Service Hours of Partial Hammer Use (50% of Service Hours)
Oil Filter (Hydraulic Hammer) - Replace
Every 250 Service Hours of Continuous Hammer Use
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Pilot) - Replace
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Final Drive Oil Sample - Obtain
Hydraulic System Oil Sample - Obtain
Pump Coupling Oil Level - Check
Swing Drive Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Belt - Inspect/Adjust/Replace
Boom and Stick Linkage - Lubricate
Cooling System Coolant Sample (Level 1) - Obtain
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Fuel Tank Strainer - Clean
Hydraulic System Filter Element (Fine Filtration) - Replace
Every 500 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Pilot) - Replace
Every 600 Service Hours of Continuous Hammer Use
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Every 1000 Service Hours or 6 Months
Battery - Clean
Battery Hold-Down - Tighten
Boom and Stick Linkage - Lubricate
Final Drive Oil Level - Check
Fuel Tank Cap Filter - Replace
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Pilot) - Replace
Rollover Protective Structure (ROPS) - Inspect
Swing Drive Oil - Change
Every 1000 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Every 2000 Service Hours or 1 Year
Engine Valve Lash - Check
Final Drive Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Receiver Dryer (Refrigerant) - Replace
Swing Gear - Lubricate
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 18 Months
Hydraulic System Oil - Change
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 5000 Service Hours
ARD Spark Plug - Clean
Diesel Exhaust Fluid Filter - Replace
Diesel Exhaust Fluid Injector - Replace
Diesel Particulate Filter - Clean
Fuel Priming Pump - Replace
Every 5000 Service Hours or 3 Years
Hydraulic System Oil (If Equipped with Fine Filtration Filter) - Change
Pump Coupling Oil - Change
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
2803154
EDGE AS
M313D
M313D
2803157
EDGE AS-CUTTING
M313D
M313D
2803156
EDGE AS
M313D
M313D
2803155
EDGE AS
M313D
M313D
2803153
EDGE AS-CUTTING
M313D
M313D
2803152
EDGE AS-CUTTING
M313D
M313D
4421818
EDGE
311D LRR, 311F LRR, 312D, 312D L, 312E, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312E, 314E LCR
4416631
EDGE AS-CUTTING
311D LRR, 311F LRR, 312D, 312D L, 312E, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312E, 314E LCR
4416621
EDGE-CUTTING
311D LRR, 311F LRR, 312D L, 312E L, 314E LCR
311D LRR, 311F LRR, 312D L, 312E L, 314E LCR
4416620
EDGE-CUTTING
311D LRR, 311F LRR, 312D L, 312E L, 314E LCR
311D LRR, 311F LRR, 312D L, 312E L, 314E LCR
4421790
EDGE
311D LRR, 311F LRR, 312D L, 312E L, 314E LCR
311D LRR, 311F LRR, 312D L, 312E L, 314E LCR
3579720
EDGE AS
315D L, 316E L, 318E L, M316D, M318D, M318D MH
315D L, 316E L, 318E L, M316D, M318D, M318D MH