EDGE-SEGMENT 3800207 - Caterpillar

Procedure:
1. Use a cutting torch to remove the portions of the track roller frames shown in the shaded areas of the illustration.2. Fabricate two mild steel plates 140 mm (5.5") in length, 110 mm (4.3") wide, and 16 mm (.625") thick for each roller frame.3. Use a 16 mm (.625") fillet weld to fasten the plates to the rear of the track roller frames as shown in the illustration.4. Fabricate two mild steel plates 140 mm (5.5") in length, 75 mm (3.0") wide and 16 mm (.625") thick for each track roller frame.5. Use a 16 mm (.625") fillet weld to fasten the plates to the front of the track roller frames as shown in the illustration.
Track roller frame modifications.