4365521 EDGE-CUTTING Caterpillar parts
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
Rating:
Alternative (cross code) number:
CA4365521
436-5521
4365521
CA4365521
436-5521
4365521
Weight: 130 pounds 59 kg.
EXCAVATOR,
Number on catalog scheme:
1
For full view, you need register
Information:
9G4574 24V 35A (Nippondenso Number 100211-0860); 6T7223 24V 50A (Nippondenso Number 100211-0890)
9G4574 AlternatorNo adjustment can be made to change the rate of charge on the alternator regulator. If rate of charge is not correct, a replacement of the regulator is necessary.2P1204 24V 15A (Prestolite Number ANB-7004)
Prestolite Alternator Regulator
1. Adjustment screw. 2. High output position. 3. Green wire to field terminal of alternator. 4. Low output position. 5. Orange wire to field supply terminal.The regulator components are sealed in an insulation of epoxy. The regulator is an electronic component with no moving parts (solid state) and has an adjustment screw (1) on the back. This voltage adjustment screw is used to meet different needs of operation at different times of the year. To increase or decrease by .5 volts from the normal (N) setting, remove the regulator and change the position of the adjustment screw and pointer. Move the adjustment screw (1) and pointer to "H" position (2) to increase the voltage. Move adjustment screw (1) and pointer to "L" position (4) to decrease the voltage.Starting System
Use the multimeter in the DCV range to find starting system components which do not function.Move the start control switch to activate the starter solenoid. Starter solenoid operation can be heard as the pinion of the starter motor is engaged with the ring gear on the engine flywheel.If the solenoid for the starter motor will not operate, it is possible that the current from the battery did not get to the solenoid. Fasten one lead of the multimeter to the connection (terminal) for the battery cable on the solenoid. Put the other lead to a good ground. A zero reading is an indication that there is a broken
9G4574 AlternatorNo adjustment can be made to change the rate of charge on the alternator regulator. If rate of charge is not correct, a replacement of the regulator is necessary.2P1204 24V 15A (Prestolite Number ANB-7004)
Prestolite Alternator Regulator
1. Adjustment screw. 2. High output position. 3. Green wire to field terminal of alternator. 4. Low output position. 5. Orange wire to field supply terminal.The regulator components are sealed in an insulation of epoxy. The regulator is an electronic component with no moving parts (solid state) and has an adjustment screw (1) on the back. This voltage adjustment screw is used to meet different needs of operation at different times of the year. To increase or decrease by .5 volts from the normal (N) setting, remove the regulator and change the position of the adjustment screw and pointer. Move the adjustment screw (1) and pointer to "H" position (2) to increase the voltage. Move adjustment screw (1) and pointer to "L" position (4) to decrease the voltage.Starting System
Use the multimeter in the DCV range to find starting system components which do not function.Move the start control switch to activate the starter solenoid. Starter solenoid operation can be heard as the pinion of the starter motor is engaged with the ring gear on the engine flywheel.If the solenoid for the starter motor will not operate, it is possible that the current from the battery did not get to the solenoid. Fasten one lead of the multimeter to the connection (terminal) for the battery cable on the solenoid. Put the other lead to a good ground. A zero reading is an indication that there is a broken
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
2921331
EDGE AS
325D, 330D, 336D
325D, 330D, 336D
3726375
EDGE AS
336D, 336D2, 345D, 345D L, 349D, 349D L
336D, 336D2, 345D, 345D L, 349D, 349D L
3668915
EDGE AS
336D, 336D2, 340D L, 340D2 L, 345D, 345D L, 349D, 349D L, 349E L
336D, 336D2, 340D L, 340D2 L, 345D, 345D L, 349D, 349D L, 349E L
3668920
EDGE AS
336D2, 340D L, 340D2 L, 345D, 345D L, 349D, 349D L, 349E L
336D2, 340D L, 340D2 L, 345D, 345D L, 349D, 349D L, 349E L
4401556
EDGE
336D, 345D, 345D L
336D, 345D, 345D L
4401555
EDGE
336D, 345D, 345D L
336D, 345D, 345D L
3393753
EDGE AS
336D, 336D L, 336D2, 336D2 L, 336E LN, 340D L, 340D2 L, 345D L, 349E L VG
336D, 336D L, 336D2, 336D2 L, 336E LN, 340D L, 340D2 L, 345D L, 349E L VG
3649400
EDGE AS
336D, 336D2
336D, 336D2
3590867
EDGE AS
336D L, 336D2, 336D2 L, 336E LN, 349D L, 349E L VG
336D L, 336D2, 336D2 L, 336E LN, 349D L, 349E L VG
4401578
EDGE-CUTTING
336D
336D
3736822
EDGE-CUTTING
336E L
336E L
4232331
EDGE
336E L
336E L
4365543
EDGE
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
4365542
EDGE
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
324E L, 329E L, 336D, 336D2, 336E L, 336E LH
3483103
EDGE AS
324E L, 324E LN, 329E L, 329E LN, 336E LN
324E L, 324E LN, 329E L, 329E LN, 336E LN
3016966
EDGE AS
324D L, 329D L, 329D LN, 336D L, 336D LN
324D L, 329D L, 329D LN, 336D L, 336D LN
2753257
EDGE AS
324D L, 329D L, 329D LN, 336D LN
324D L, 329D L, 329D LN, 336D LN
2950487
EDGE AS
324D L, 329D L, 329D LN, 336D L, 336D LN
324D L, 329D L, 329D LN, 336D L, 336D LN
3483104
EDGE AS
324E LN, 329E LN, 336D, 336D L, 336D2, 336E LH, 336E LN
324E LN, 329E LN, 336D, 336D L, 336D2, 336E LH, 336E LN
3483102
EDGE AS
324E LN, 329E LN, 336E LN
324E LN, 329E LN, 336E LN
3719053
EDGE-CUTTING
324E LN, 329E LN
324E LN, 329E LN
3719052
EDGE-CUTTING
323D L, 323D2 L, 324E LN, 329E LN
323D L, 323D2 L, 324E LN, 329E LN
3719051
EDGE-CUTTING
324E LN, 329E LN
324E LN, 329E LN
3719049
EDGE AS
324E LN, 329E LN
324E LN, 329E LN