EDGE GP-CUTTING 4425332 - Caterpillar

When installing the swing bearing, stamp mark "S" (2) on inner race must be positioned, as shown, relative to car body and stopper (1) on outer race.(3) Apply 2P-2506 Lubricant to the surfaces of parts which contact with dowels.(4) Apply 9S-3263 Thread Lock on threads of eight bolts. Torque for bolts ... 37 4 N m (27 3 lb ft)(5) Torque for bolts ... 5 1 N m (4 1 lb ft)(6) Apply 2P-2506 Lubricant on threads of thirty-six bolts. Torque for bolts ... 900 100 N m (660 75 lb ft)(7) Apply 2P-2506 Lubricant on threads of forty bolts. Torque for bolts ... 900 100 N m (660 75 lb ft)(8) Apply 9S-3263 Thread Lock on threads of four bolts. Torque for bolts ... 37 4 N m (27 3 lb ft)(9) Remove access cover after the swing bearing has been installed. Add about 26 kg (57 lbs) of Multipurpose Molybdenum Grease (MPGM).(10) Torque for plug ... 60 6 N m (44 4 lb ft)Apply 1U-8846 Gasket Maker on surfaces indicated by E.