EDGE AS 4919811 - Caterpillar

4919811 EDGE AS Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4919811
491-9811
4919811

Weight: 5337 pounds 2420 kg.

Buy EDGE AS 4919811 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

NEW HEAVY DUTY WATER PUMP FITS CUMMINS DIESEL ENGINES H HF HR HRS 512462 4919811

$239.95

17 Jul 2019

RAREELECTRICAL: RAREELECTRICAL

NEW HEAVY DUTY WATER PUMP FITS CUMMINS DIESEL ENGINES H HF HR HRS 512462 4919811
100% NEW and Made with the Highest Quality Components Available || Full One Year Warranty || Computer tested for consistent Quality and unsurpassed reliability || Water Pump - Source: Aftermarket

This part in 1 request: Show. This information for suppliers only!

#338586 491-9811

2019-07-18

Number on catalog scheme: 4

Caterpillar 4919811 Parts scheme EDGE AS

For full view, you need register

Information:

SR4B
All ball bearings should be cleaned. The cavity in the bracket should be repacked with 2S-3230 Grease. Pack the ball bearings (one-third to one-half of the volume of the cavity).
Use an induction heater to heat the ball bearings to 107 °C (224.6 °F) for 10 minutes in order to install either of the following bearings: ball bearings that are new and ball bearings that have been inspected. Mount the bearings on the shaft. To reinstall the hub, heat the hub to 400 °C (752.0 °F) for 3 hours. Mount the hub to the shaft.
Ensure that the tube of the grease gun is filled with grease.
Remove the bracket drain plug and operate the generator for 1 hour. This procedure will allow the grease to expand. The expanding grease will force the excess grease from the cavity. When the excess grease is forced from the cavity, the internal pressure will be reduced. The generator should continue to operate until the grease stops purging.
Stop the engine. Install the bracket drain plug. Wipe off the excess grease.
For greasing intervals, follow the recommendations on the lubrication plate (if equipped) or refer to Maintenance Schedule, "Generator Bearing - Lubricate". Whenever the bearings are greased, repeat Step 1. DO NOT MIX GREASES.