EDGE-CUTTING 4T2235 - Caterpillar

Illustration 14 g01249022
Loosen the hose clamp and disconnect hose assembly (31) from the tap.
Loosen the hose clamps. Remove tube assembly (32) .
Illustration 15 g01249000
Disconnect hose assembly (33) and hose assembly (34) .
Illustration 16 g01249019
Disconnect electrical connector (35) .
Disconnect two electrical cables (37) from the electric starting motor.
Disconnect two electrical cables (38) from the electric starting motor solenoid.
Disconnect hose assembly (36) .
Illustration 17 g01249042
Disconnect electrical connector (39) .
Disconnect wire (41) from the fuel gauge.
Remove bolt (40) from the clip.
Illustration 18 g01249024
Loosen the hose clamp and disconnect hose assembly (44) from the tap.
Remove bolt (45), bolt (46) and the two clips.
Disconnect electrical cable (43) .
Disconnect wiring harness (42) at the electrical connector.
Illustration 19 g01249011
Remove four bolts (48) from elbow (47) .
Illustration 20 g01249423
Disconnect hose assembly (49) .
Remove the four bolts from tube assembly (50). Remove tube assembly (50) .
Illustration 21 g01260291
Disconnect hose assembly (51) .
Illustration 22 g01249817
Disconnect hose assembly (52) .
Remove two bolts (53) and the clips. Move hose assembly (52) out of the way.
Illustration 23 g01249030
Remove two bolts (55) and the clips.
Disconnect hose assembly (54) .
Illustration 24 g01249044
Loosen two hose clamps (57). Disconnect hose assembly (56) .
Illustration 25 g01248920
Attach Tooling (A) and a suitable lifting device to engine, torque converter and updrive gears (58). The weight of engine, torque converter and updrive gears (58) is approximately 1820 kg (4012 lb).
Illustration 26 g01248421
Remove bolt (61), the nut the washer and upper rubber mount (59) .
Repeat Step 44 for the mount on the other side.
Remove bolt (64), the nut the washer and upper rubber mount (60) .
Repeat Step 46 for the mount on the other side.
Remove engine, torque converter and updrive gears (58) .
Remove lower rubber mounts (62) and (63) from both sides of the rear frame.