EDGE-CUTTING 4T3007 - Caterpillar

4T3007 EDGE-CUTTING Caterpillar parts 120B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4T3007
4T-3007
4T3007

Weight: 118 pounds 53 kg.

Information:

ABRASION RESISTANT MATERIAL N

BOLT HOLE SIZE 18 mm

CHAMFER EDGE

HOLE PATTERN OFFSET

HOLE SPACING 152.4 mm

LENGTH 1826.4 mm

NUMBER OF HOLES 13

THICKNESS 19 mm

TUNGSTEN CARBIDE N

WIDTH 203.2 mm

Buy EDGE-CUTTING 4T3007 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

CTP 4T3007 Motor Grader Blade, Boron Steel Alloy, 6' Length, 8" Width, 3/4" Thickness

$200.31

07 May 2022

Amazon.com

CTP 4T3007 Motor Grader Blade, Boron Steel Alloy, 6' Length, 8" Width, 3/4" Thickness
CTP Made of Boron Steel Alloy || 6' Length || 8" Width || 3/4" Thickness

$247.36

21 Jan 2019

CATERPILLAR AFTERMARKET: CATERPILLAR AFT

Caterpillar Edge-Cutting 4T3007 New

4T3007 - EDGE-CUTTING fits Caterpillar (CAT)

$165.34

05 May 2020

-: -

4T3007 - EDGE-CUTTING fits Caterpillar (CAT)
4T3007 Edge-cutting

Show more prices Caterpillar parts

Number on catalog scheme: 7

Caterpillar 4T3007 Parts scheme EDGE-CUTTING

For full view, you need register

Compatible equipment models: 4T3007:

MOTOR GRADER 120B Caterpillar

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system to a level below the coolant temperature sensor. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining procedure.
Illustration 1 g02315373
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (3) from coolant temperature sensor (1).
Use a deep socket in order to remove coolant temperature sensor (1) from the cylinder head.
Remove O-ring seal (4) from coolant temperature sensor (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02315373
Install a new O-ring seal (4) onto coolant temperature sensor (1). Note: Do not lubricate the O-ring seal.
Use a deep socket in order to install coolant temperature sensor (1) to the cylinder head. Tighten the coolant temperature sensor to a torque of 20 N m (177 lb in).
Connect harness assembly (3) to coolant temperature sensor (1). Slide locking tab (2) into the locked position.
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" and refer to Operation and Maintenance Manual, "Cooling System Coolant - Test/Add" for the correct filling procedures.