AVSPARE.COM
parts catalog

EDGE CUTTING 4Z8056 - Caterpillar



4Z8056 EDGE CUTTING Caterpillar parts EDGE
Rating:
86
Alternative (cross code) number:
CA4Z8056
4Z-8056
4Z8056
Caterpillar 4Z8056 EDGE CUTTING
Weight: 200 pounds 90 kg.

Buy EDGE CUTTING 4Z8056 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Start By:
Remove the exhaust cooler (NRS).
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Drain the coolant. Refer to Operations and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining procedures.
Illustration 1 g03686757
Remove tube assemblies (1). Remove hose (3).
Disconnect tube assembly (4).
Remove bolts (5) and remove engine oil cooler (2). Installation Procedure
Install engine oil cooler (2) in the reverse order of removal.


Parts edge Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.