AVSPARE.COM
parts catalog

EDGE-CUTTING 4Z8936 - Caterpillar



4Z8936 EDGE-CUTTING Caterpillar parts EDGE
Rating:
21
Alternative (cross code) number:
CA4Z8936
4Z-8936
4Z8936
Caterpillar 4Z8936 EDGE-CUTTING
Weight: 589 pounds 267 kg.

Buy EDGE-CUTTING 4Z8936 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 24 g03867494
Illustration 25 g03867495
Illustration 26 g03867496
Install Tooling (C) to anchor (26). Turn Tooling (C) clockwise to compress return spring (40).
Remove pin (42) from guide pin (41).
Turn Tooling (C) counterclockwise to release the tension on return spring (40).
Remove Tooling (C), guide pin (41) and return spring (40) from anchor (26).
Repeat Step 37 through Step 40 for the five remaining return springs, guide pins, and pins.
Illustration 27 g03868029
Remove piston (43) from housing (33).
Illustration 28 g03868030
Remove seals (44) and (45) from piston (43).
Illustration 29 g03868031
Remove 30 bolts (47) from anchor (26).
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Loosen four special nuts (46) evenly until all the spring force on housing (33) is released.
Illustration 30 g03868033
Attach Tooling (A) and a suitable lifting device to housing (33). The weight of housing (33) is approximately 120 kg (265 lb). Remove housing (33) from anchor (26).
Remove Tooling (A) and four taperlock studs (48) from housing (33).
Illustration 31 g03868034
Turn housing (33) so that the splined end faces downward.
Remove three seals (49) from housing (33).
Remove seals (50) and (51) from housing (33).
Remove four taperlock studs (52) from housing (33).
Illustration 32 g03868036
Remove O-ring seal (53) from anchor (26).
Remove piston (54) from anchor (26).
Illustration 33 g03868037
Remove 25 spring assemblies (55) from anchor (26).
Illustration 34 g03868038
Remove eight bolts (56) from sleeve (57).
Remove sleeve (57) from anchor (26).
Illustration 35 g03868040
Remove O-ring seal (58) from sleeve (57).
Illustration 36 g03868041
Remove four plugs (59) from anchor (26). Remove the O-ring seals from plugs (59).


Parts edge Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.