EDGE-CUTTING 5332659 - Caterpillar

Illustration 1 g01439415
From the "Setup Menu – Configuration" dialog, press the down arrow key or the up arrow key until "Avoidance Zone" is highlighted.
Press the "OK" key. A dialog that is similar to illustration 2 appears.In this example, the dialog shows the default warning distance for a grader.
Illustration 2 g01269676
Do one of the following.
Press the arrow keys in order to set the warning distance.
Press the "Default <value>" soft key in order to set the default warning distance for the selected machine type.
Press the "OK" key in order to confirm the setting.
Press the "ESC" key in order to exit the "Setup Menu – Configuration" dialog. The changes take effect immediately.