EDGE-SEGMENT 5473340 - Caterpillar

Removal Procedure
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This action helps to prevent fluid loss, and helps to keep contaminants from entering the system.Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Input Speed Sensors
Illustration 1 g01269299
Disconnect harness assembly (1). Remove bolt (3) and speed sensor (2).
Illustration 2 g06102638
Remove bolt (4) and speed sensor (5).Output Speed Sensors
Illustration 3 g01269246
Disconnect harness assembly (2). Remove bolt (4) and speed sensor (1). Repeat for the remaining speed sensor (3).