6I5248 EDGE AS Caterpillar parts
320 L, 320C, 325, 325 L, 325B, 325C, 330, 330 FM L, 330 L
Rating:
Alternative (cross code) number:
CA6I5248
6I-5248
6I5248
CA6I5248
6I-5248
6I5248
Weight: 402 pounds 182 kg.
EXCAVATOR,
Compatible equipment models: 6I5248:
Number on catalog scheme:
2
For full view, you need register
Information:
Self Test
A Self Test is initiated when the Key Start switch is placed in the START position or in the RUN position. When the Key Start switch is placed in the START position or in the RUN position the following occurs:
Power ON. The Instrument Cluster LCD illuminates showing information about the release and the firmware.
All gauges on the Instrument Cluster go to the middle positions. All indicators are still off. The gauges maintain the middle positions for approximately 0.5 second.
All gauges and the go to the left and all indicators turn on. The action alarm also turns on.
All gauges sweep to the far right. When the needles are in the far right position, all the indicators turn off. The action alarm also turns off.
All the gauges sweep back left.
All the gauges and indicators go to positions that are based on actual values.The self test may also be initiated via the service menu. This self test is referred to as the Self Test. When the Self Test is entered via the service menu, the following occurs:
All indicators turn on. The action alarm turns on. The gauges sweep to the far right positions.
All indicators turn off. The action alarm turns off. The gauges sweep back to the left.
All the gauges and indicators go back to positions that are based on actual values.
A Self Test is initiated when the Key Start switch is placed in the START position or in the RUN position. When the Key Start switch is placed in the START position or in the RUN position the following occurs:
Power ON. The Instrument Cluster LCD illuminates showing information about the release and the firmware.
All gauges on the Instrument Cluster go to the middle positions. All indicators are still off. The gauges maintain the middle positions for approximately 0.5 second.
All gauges and the go to the left and all indicators turn on. The action alarm also turns on.
All gauges sweep to the far right. When the needles are in the far right position, all the indicators turn off. The action alarm also turns off.
All the gauges sweep back left.
All the gauges and indicators go to positions that are based on actual values.The self test may also be initiated via the service menu. This self test is referred to as the Self Test. When the Self Test is entered via the service menu, the following occurs:
All indicators turn on. The action alarm turns on. The gauges sweep to the far right positions.
All indicators turn off. The action alarm turns off. The gauges sweep back to the left.
All the gauges and indicators go back to positions that are based on actual values.
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
311C, 311D LRR, 311F LRR, 312C L, 312D, 314C, 314D LCR, 315C, 315D L, 320C, 322C, 325B L, D6E, D6E SR, D6G, D6G SR, D6G2 XL, D6T XL
315C, 320C, 322C, 325B L, 924G, 924GZ, 924H, 924K, 928HZ, 930G, 930K, 938K
325C, 328D LCR, 834G, D7G
320C
1073384
EDGE-CUTTING
330 FM L
330 FM L
1127809
EDGE AS
330 L
330 L
7Y7794
EDGE
330 FM L
330 FM L
1098561
EDGE AS
325
325
1098556
EDGE AS
325B
325B
1098557
EDGE AS
325B
325B
1235376
EDGE AS
325B
325B
1235420
EDGE AS
325B
325B
3483091
EDGE AS
320C, 322C, 323D L, 324D LN, 324E LN, 325C, 325D L, 329E LN
320C, 322C, 323D L, 324D LN, 324E LN, 325C, 325D L, 329E LN
2619706
EDGE AS
320C, 323D L, 323D LN, 325C
320C, 323D L, 323D LN, 325C
2619705
EDGE AS
320C, 323D LN, 325C
320C, 323D LN, 325C
2262220
EDGE AS
320C
320C
2573193
EDGE AS
320C, 323D L, 323D LN, 323D SA
320C, 323D L, 323D LN, 323D SA
2509682
EDGE AS
320C, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
320C, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
2689958
EDGE AS-CUTTING
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
2645423
EDGE AS-CUTTING
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
2642669
EDGE AS
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
2642668
EDGE AS-CUTTING
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
2642665
EDGE AS-CUTTING
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN
1424292
EDGE AS
320C, 325B L, 325C, 330B L
320C, 325B L, 325C, 330B L