EDGE-CUTTING 6W2980 - Caterpillar

Illustration 1 g02608157
Illustration 2 g02608156
Table 1
Specification for 262-1080 Turbocharger Gp and 245-8474 Turbocharger Gp
Item Qty Part Specification Description
1 1 9N-2038 Turbine Clamp As Use the following procedure to tighten the turbine clamp assembly:
1. Torque to 18.1 N m (160.2 lb in).
2. Loosen to 5.6 N m (49.6 lb in).
3. Again, torque to 13.6 1.2 N m (120.4 10.6 lb in).
2 - - Opening pressure of the wastegate is 179.3 3.5 kPa (26.0 0.5 psi).
3 - 268-2960 Clamp As Torque to 13.6 1.2 N m (120.4 10.6 lb in)
4 4 375-2467 Flange Locknut Before assembly, apply Loctite C5A copper anti-size to the threads.
Torque to 70 5 N m (52 4 lb ft).