EDGE-CUTTING 6Y0313 - Caterpillar

6Y0313 EDGE-CUTTING Caterpillar parts 854G, 990, 990 II, D9L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6Y0313
6Y-0313
6Y0313

Weight: 313 pounds 142 kg.

Information:

ABRASION RESISTANT MATERIAL N

BOLT HOLE SIZE 28 mm

CHAMFER EDGE

HOLE PATTERN OFFSET

HOLE SPACING 152.4 mm

LENGTH 1353.2 mm

NUMBER OF HOLES 9

THICKNESS 35 mm

TUNGSTEN CARBIDE N

WIDTH 406 mm

Buy EDGE-CUTTING 6Y0313 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR, WHEEL LOADER,

Compatible equipment models: 6Y0313:

TRACK-TYPE TRACTOR D9L

WHEEL DOZER 854G

WHEEL LOADER 990 990 II Caterpillar

Number on catalog scheme: 4

Caterpillar 6Y0313 Parts scheme EDGE-CUTTING

For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-7640 Stand 2
A 8S-7615 Pin 2
A 8S-8048 Saddle 2
A 8S-7611 Tube 2
B 4C-4089 Jack 1
Illustration 1 g00730673
Position tooling (B) and axle (3) under the machine.
Raise axle (3). Install pin (5), the nut, and bolt (4). Tighten the nut to 100 20 N m (75 15 lb ft).
Remove tooling (B). Remove tooling (A) .
Lower the machine to the ground.
Illustration 2 g00730446
Connect line (1) to cylinder (2) ., End By: Install the counterweight. Refer to Disassembly and AssemblyRENR3585, "Counterweight - Remove and Install" for the correct procedure.