7J2846 EDGE GP-CUTTING Caterpillar parts
7A, 7S, D7G
Rating:
Alternative (cross code) number:
CA7J2846
7J-2846
7J2846
CA7J2846
7J-2846
7J2846
Weight: 0.25 pounds 0 kg.
BULLDOZER, TRACK-TYPE TRACTOR,
Information:
Personal injury or death can result from the bucket falling.Block the bucket before changing bucket tips.
Note: To maximize the life of the bucket tip and the penetration of the bucket tip, the bucket tip can be rotated.
Illustration 1 g00101352
(1) Usable
(2) Removal Procedure
(3) Removal ProcedureCheck the bucket tips for wear. If the bucket tip has a hole, replace the bucket tip.Removal
Illustration 2 g03830653
(1) Bucket Tip
(2) Retainer
(3) Adapter
(4) Compression Sleeve
Use a 1/2" ratchet and rotate the retainer (2) 180 degrees to the unlocked position.
Remove the bucket tip (1) from adapter (3).
Clean adapter (3).Installation
Clean the adapter and the area around the latch, if necessary.
Install the new bucket tip (1) onto the adapter (3).
Illustration 3 g03832654
Use a 1/2" ratchet to rotate the retainer (2) 180 degrees to the locked position.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
5J6849
EDGE-CUTTING
7A, 7S, D7G
7A, 7S, D7G
7J2849
EDGE GP-CUTTING
7A, 7S, D7G
7A, 7S, D7G
4T2992
EDGE-CUTTING
824H, 824K, D7G
824H, 824K, D7G
4T3420
EDGE-CUTTING
824G, 824G II, 824H, 824K, 836H, 836K, D7G
824G, 824G II, 824H, 824K, 836H, 836K, D7G
4T2993
EDGE-CUTTING
325C, 328D LCR, 834G, D7G
325C, 328D LCR, 834G, D7G
9J5228
EDGE-CUTTING
7A, 816B, D7G
7A, 816B, D7G
5J6849
EDGE-CUTTING
7A, 7S, D7G
7A, 7S, D7G
2862016
EDGE-CUTTING
120M, 12M, 140M, 143H, 14H, 14M, 160H, 160M, 163H
120M, 12M, 140M, 143H, 14H, 14M, 160H, 160M, 163H
8E4566
EDGE GP-CUTTING
924G, 924GZ, 924H, 924HZ, 924K, 928F, 928G, 928HZ, 930G, 930K, 938K, IT14G, IT18F, IT24F, IT28F, IT28G
924G, 924GZ, 924H, 924HZ, 924K, 928F, 928G, 928HZ, 930G, 930K, 938K, IT14G, IT18F, IT24F, IT28F, IT28G
2831068
EDGE-CUTTING
120M, 12M, 140H, 140M, 143H, 14H, 14M, 160H, 160M, 163H
120M, 12M, 140H, 140M, 143H, 14H, 14M, 160H, 160M, 163H
4T6760
EDGE-SEGMENT
990, 990 II, 990K, 992C, 992D, 992G, 992K
990, 990 II, 990K, 992C, 992D, 992G, 992K
2204758
EDGE GP-CUTTING
434E, 434F, 444E, 444F
434E, 434F, 444E, 444F
9W7042
EDGE GP-BIT & CUTTING
D9N, D9R, D9T
D9N, D9R, D9T
7T5391
EDGE GP-BIT & CUTTING
D9N, D9R, D9T
D9N, D9R, D9T
1052884
EDGE GP-CUTTING
PM-565
PM-565
9R2462
EDGE GP-CUTTING
416, 426, 428
416, 426, 428
9J5906
EDGE GP-CUTTING
631D, 637D
631D, 637D
9J5905
EDGE GP-CUTTING
631D, 637D
631D, 637D