EDGE-CUTTING 7T1638 - Caterpillar

Illustration 1 g03329397
Table 1
Specification for 118-7509 Hoe Stick Gp    
Item     Qty     Part     Specification Description    
-     All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, bucket, bushings, and the cylinder pin bores.    
1     1     099-7091 Shim     As required, use the shim of thickness
1.5 mm (0.06 inch) to adjust maximum lateral clearance of
1.0 mm (0.04 inch).    
2     As required, use the following shims in order to adjust the maximum lateral clearance of
1.0 mm (0.04 inch):    
1 133-2717 Shim     Thickness is
0.5 mm (0.02 inch).    
1 093-0065 Shim     Thickness is
1.0 mm (0.04 inch).    
3     2     172-5853 Pin As     Diameter is
59.850 0.025 mm (2.3563 0.0010 inch).    
4     2     8T-4780 Bolt     Torque to
325 40 N m (240 30 lb ft).    
5     2     114-4866 Bushing     Bore before assembly is
50.180 0.020 mm (1.9756 0.0008 inch).    
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).
6     2     114-4850 Lip Type Seal     Lubricate lightly with lubricant that is being sealed.    
7     2     113-4982 Bushing     Bore before assembly is
70.230 0.020 mm (2.7650 0.0008 inch).    
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).
8     4     093-1434 Lip Type Seal     Lubricate lightly with lubricant that is being sealed.    
9     As required, use the following shims in order to adjust the maximum lateral clearance of
1.0 mm (0.04 inch):    
1 133-2717 Shim     Thickness is
0.5 mm (0.02 inch).    
1 093-0065 Shim     Thickness is
1.0 mm (0.04 inch)    
10     1     099-7091 Shim     As required, use the shim of thickness
1.5 mm (0.06 inch) to adjust maximum lateral clearance of
1.0 mm (0.04 inch).    
11     1     128-7656 Bushing     Bore before assembly is
70.230 0.020 mm (2.7650 0.0008 inch).    
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).