EDGE-CUTTING 7T1639 - Caterpillar

Illustration 1 g03322392
Table 1
Specification for 114-9312 Bucket Cylinder Gp    
Item     Qty     Part     Specification Description    
1     1     111-7608 Bushing     Bore before assembly is 60.180 0.020 mm (2.3693 0.0008 inch).    
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).
A     1     114-9317 Cylinder As     Bore diameter is
100.00 mm (3.937 inch).    
B     1     136-6022 Rod As     Diameter is
69.93 0.03 mm (2.753 0.001 inch).    
C     1     374-5153 Head     Bore over two lands is
70.53 0.03 mm (2.777 0.001 inch).    
2     1     111-7609 Bushing     Bore before assembly is
60.180 0.020 mm (2.3693 0.0008 inch).    
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).
3     1     143-8149 Special Locknut     Before assembly, apply 309-6932 Hydraulic Oil to the face and threads.    
Torque to
2900 145 N m (2139 107 lb ft).
4     1     119-5456 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
5     1     9X-7298 Seal As     Lubricate the inside diameter and the outside diameter with clean grease.    
6     1     143-8025 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
7     1     6I-6922 Seal Ring     Slit of ring must turn in direction of piston.    
8     1     114-0753 Bushing     Outer Diameter is
75.120 0.025 mm (2.9575 0.0010 inch).    
Thickness is
2.475 0.025 mm (0.0974 0.0010 inch).
9     1     170-9841 Buffer Seal     Lubricate lightly with lubricant that is being sealed.    
10     1     170-9857 U-Cup Seal     Lubricate lightly with lubricant that is being sealed.    
11     1     165-9283 Lip Type Seal     Lubricate lightly with lubricant that is being sealed.    
12     -     -     Before assembly, apply green loctite 601 or loctite 609 to the wiper seal groove.