EDGE-CUTTING 7T5702 - Caterpillar

7T5702 EDGE-CUTTING Caterpillar parts D9N, D9R, D9T

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7T5702
7T-5702
7T5702

Weight: 323 pounds 146 kg.

Information:

ABRASION RESISTANT MATERIAL N

BOLT HOLE SIZE 28 mm

CHAMFER EDGE

HOLE PATTERN CENTERLINE

HOLE SPACING 152.4 mm

LENGTH 1787.4 mm

NUMBER OF HOLES 12

THICKNESS 35 mm

TUNGSTEN CARBIDE N

WIDTH 330 mm

Buy EDGE-CUTTING 7T5702 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

7T5702 Edge-Cutting (New AFTERMARKET) - G&T Engine Parts

$526.21

20 Oct 2025

US: QUALITY PARTS

7T5702 Edge-Cutting (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3408, 3408C, 3408E, C18; TRACK-TYPE TRACTOR: D9R, D9T. ENGINE - MACHINE: 3408; 3408C; 3408E; C18; TRACK-TYPE TRACTOR: D9R; D9T. || Condition: NEW AFTERMARKET || Weight: 355.74 lbs || Dimensions: 35-35-10 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.

7T5702 - Edge-Cutting 6Y5539 9W7043 fits Caterpillar (CAT)

$803.84

03 Feb 2022

US: Florida-Parts-Z

7T5702 - Edge-Cutting 6Y5539 9W7043 fits Caterpillar (CAT)
FIRST PRICE PARTS

CTP 7T5702 Ground Engaging Tools Cutting Edge

$711.05

10 Oct 2021

Amazon.com

CTP 7T5702 Ground Engaging Tools Cutting Edge
CTP For Ground Engaging Tools || Longer tips || Sold in each

Show more prices Caterpillar parts

This part in 1 request: Show. This information for suppliers only!

#660952 7T5702

2021-06-01

Number on catalog scheme: 3

Caterpillar 7T5702 Parts scheme EDGE-CUTTING

For full view, you need register

Compatible equipment models: 7T5702:

TRACK-TYPE TRACTOR D9N D9R D9T Caterpillar

Information:

Illustration 1 g03344812
Illustration 2 g03344855
Table 1
Item Qty Part Specification Description
1 6 031-3185 Bolt Tighten the bolt in a numerical sequence 1,4,2,5,3,6,1,4 as shown in Illustration 2 to 240 40 N m (177 30 lb ft).
B - - Before tightening the bolts for the stub shaft, set distance (B) between the centers of camshaft gear and gear assembly with a gauge in order to obtain the gear backlash of 0.216 0.114 mm (0.0085 0.0045 inch).
C 1 6V-3677 Dowel Extension of the new dowel is 12.5 0.5 mm (0.49 0.02 inch).
2 1 361-8240 Camshaft Gear Extension of 103-0126 Dowel from rear face of the camshaft gear is 8.0 0.5 mm (0.31 0.02 inch).
3 8 0S-1571 Bolt Torque to 66 6 N m (49 4 lb ft).
4 1 102-5861 Thrust Plate Thickness is 5.000 0.025 mm (0.1968 0.0009 inch).
5 1 117-8801 O-Ring Seal Before assembly, lubricate the bore lightly with 50/50 mixture of 8T-2998 Lubricant and clean engine oil.
6 1 417-4617 Idler Gear As After installation, bore in the 417-4618 Bushing for the stubshaft is 50.857 0.013 mm (2.0022 0.0005 inch).
Installation depth of the bushing is 2.5 0.5 mm (0.09 0.02 inch).
7 1 151-5966 Stub Shaft As Diameter is 50.800 0.013 mm (2.0000 0.0005 inch).
Extension of 6I-3623 Dowel is 4.5 0.5 mm (0.18 0.02 inch).
8 1 417-4615 Idler Gear As After installation, Bore in the 417-4616 Bushing is 50.857 0.013 mm (2.0022 0.0005 inch).
Installation depth of the bushing is 1.5 0.5 mm (0.06 0.02 inch).
9 1 158-3416 Stub Shaft Diameter is 50.800 0.013 mm (2.0000 0.0005 inch).
Illustration 3 g03344857
Section D-D
Illustration 4 g03344813
Table 2
Item Qty Part Specification Description
10 1 361-8233 Cluster Gear Assembly After installation, bore in the 128-2661 Bushing is 63.566 0.013 mm (2.5026 0.0005 inch).
Installation depth is 2.8 0.5 mm (0.11 0.02 inch).
11 1 197-4971 Stub Shaft Diameter of the new stub shaft is 63.500 0.013 mm (2.5000 0.0005 inch).
12 5 2J-3118 Locking Bolt Tighten the bolt in a numerical sequence 1, 3, 4, 5, 2, 1, 2, 3, 4, 5, 1 as shown in the Illustration 4 to 55 10 N m (41 7 lb ft).
13 1