7T9125 EDGE-CUTTING Caterpillar parts
844, 844H, 844K, D8N, D8R, D8R II, D9N, D9R, D9T
Rating:
Alternative (cross code) number:
CA7T9125
7T-9125
7T9125
CA7T9125
7T-9125
7T9125
Weight: 142 pounds 64 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
28
mm
CHAMFER
EDGE
HOLE PATTERN
CENTERLINE
HOLE SPACING
152.4
mm
LENGTH
803.1
mm
NUMBER OF HOLES
5
THICKNESS
35
mm
TUNGSTEN CARBIDE
N
WIDTH
330
mm
TRACK-TYPE TRACTOR, WHEEL DOZER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$282.38
20 Sep 2018
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Edge-Cutting 7T9125 New
$179.34
26 May 2018
14231 Hundredths Pounds
CTP: CTP
Caterpillar CUTTING EDGE (7T9125) New Aftermarket By CTP
7T9125 Weight(lbs): 142.00 Length(cm): 80.0000 Width(cm): 33.2000 Depth(cm): 3.4000
7T9125 Weight(lbs): 142.00 Length(cm): 80.0000 Width(cm): 33.2000 Depth(cm): 3.4000
$195.00
06 Mar 2018
14300 Hundredths Pounds
CTP: CTP
7T9125 Edge-Cutting Fits Caterpillar 8A 8SU 8U 8 D8N D8R D8R II D9R D9T 57H 844
7T9125 Edge-cutting
7T9125 Edge-cutting
Number on catalog scheme:
9
For full view, you need register
Compatible equipment models: 7T9125:
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01393235
Disconnect harness assembly (2) and remove fuel pressure sensor (1) .Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01393235
Install fuel pressure sensor (1). Tighten fuel pressure sensor (1) to a torque of 20 3 N m (15 2 lb ft).
Connect harness assembly (2) .
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01393235
Disconnect harness assembly (2) and remove fuel pressure sensor (1) .Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01393235
Install fuel pressure sensor (1). Tighten fuel pressure sensor (1) to a torque of 20 3 N m (15 2 lb ft).
Connect harness assembly (2) .
Cat SIS web machinery list:
Parts edge Caterpillar catalog:
D10R, D8R, D8R II, D9R, D9T
D9N, D9R, D9T
D8N, D8R
844, 844H, 844K, D8N, D8R, D8R II, D8T, D9N, D9R
990, 990 II, D10T, D8N, D8R, D8R II, D8T
631G, 637E, 637G, 844, 844H, 844K, D10T, D8N, D8R, D8R II, D8T
D8N, D8R, D8R II, D8T
D8R, D8R II, D8T
D10R, D8R, D8R II
834G, 834H, 834K, D9N, D9R
D9N, D9R
834G, 834H, 834K, 844, 844H, 844K
D8N, D8R, D8R II
D6H, D6R, D6R II
4T3017
EDGE-CUTTING
D6R II
D6R II
D6R II
D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6T
924K, 930K, 938K, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, 963D, 966D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 970F, 972G, 972G II, 972H, 972K, 972M, 973C
527, D5H, D5H XL, D5HTSK II, D5R LGP, D6M, D6N, D6N LGP
D5H, D6M, D6N
D7H, D7R, D7R II, D7R XR
631E, 631G, 637E, 637G, 844, 844H, 844K, D8N, D8R, D8R II
7T9127
EDGE-CUTTING
988B, 988F, 988F II, D8N, D8R, D8R II
988B, 988F, 988F II, D8N, D8R, D8R II
D8N, D8R, D8R II