7T9126 EDGE-CUTTING Caterpillar parts
D8N, D8R, D8R II
Rating:
Alternative (cross code) number:
CA7T9126
7T-9126
7T9126
CA7T9126
7T-9126
7T9126
Weight: 255 pounds 115 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
28
mm
CHAMFER
EDGE
HOLE PATTERN
CENTERLINE
HOLE SPACING
152.4
mm
LENGTH
1353.2
mm
NUMBER OF HOLES
9
THICKNESS
35
mm
TUNGSTEN CARBIDE
N
WIDTH
330
mm
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$497.39
24 Jul 2022
255.5598[115.00] Pounds
US: TakePart
Caterpillar EDGE-CUTTING (7T9126) New Aftermarket By CTP
CTP
CTP
$578.75
24 Jan 2022
US: Florida-Parts-Z
4T6381 - Edge-Cutting 7T9126 4T2306 1U4943 9w4501 fits Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$480.96
07 Jan 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Edge-Cutting 7T9126 New
Number on catalog scheme:
4
For full view, you need register
Information:
Disassembly Procedure
Start By:
Remove the control valve. Refer to Disassembly and Assembly, "Control Valve (Transmission Clutch Latching) - Remove".Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01393323
Remove bolts (1) and the washers in order to separate valve body (2) from valve body (4). Remove O-ring seal (3) .
Illustration 2 g01393327
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (7) and the O-ring seal from valve body (4). Remove spring (6) and spool (5) from valve body (4) .
Repeat Step 2 for the other two valve assemblies.
Illustration 3 g01393334
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (8) and the O-ring seal from valve body (4). Remove spring (11), spring (9), pin (12), piston (13), and spacer (10) from valve body (4) .
Repeat Step 4 for the other valve assembly.
Illustration 4 g01393339
Remove valve assembly (14) from valve body (2). Remove O-ring seals (15) and the backer rings from valve assembly (14) .
Illustration 5 g01393353
Remove bolt (18) and retainer (17) in order to remove solenoid valve (16) from valve body (2) .
Illustration 6 g01393372
Remove O-ring seals (19), O-ring seal (20), and O-ring seal (21) from solenoid valve (16) .
Start By:
Remove the control valve. Refer to Disassembly and Assembly, "Control Valve (Transmission Clutch Latching) - Remove".Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01393323
Remove bolts (1) and the washers in order to separate valve body (2) from valve body (4). Remove O-ring seal (3) .
Illustration 2 g01393327
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (7) and the O-ring seal from valve body (4). Remove spring (6) and spool (5) from valve body (4) .
Repeat Step 2 for the other two valve assemblies.
Illustration 3 g01393334
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (8) and the O-ring seal from valve body (4). Remove spring (11), spring (9), pin (12), piston (13), and spacer (10) from valve body (4) .
Repeat Step 4 for the other valve assembly.
Illustration 4 g01393339
Remove valve assembly (14) from valve body (2). Remove O-ring seals (15) and the backer rings from valve assembly (14) .
Illustration 5 g01393353
Remove bolt (18) and retainer (17) in order to remove solenoid valve (16) from valve body (2) .
Illustration 6 g01393372
Remove O-ring seals (19), O-ring seal (20), and O-ring seal (21) from solenoid valve (16) .
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
D8N, D8R, D8R II
844, 844H, 844K, D8N, D8R, D8R II, D9N, D9R, D9T
631E, 631G, 637E, 637G, 844, 844H, 844K, D8N, D8R, D8R II
D8L, D8R, D9T
D10R, D8R, D8R II, D9R, D9T
D8N, D8R
844, 844H, 844K, D8N, D8R, D8R II, D8T, D9N, D9R
990, 990 II, D10T, D8N, D8R, D8R II, D8T
631G, 637E, 637G, 844, 844H, 844K, D10T, D8N, D8R, D8R II, D8T
D8N, D8R, D8R II, D8T
D8R, D8R II, D8T
D10R, D8R, D8R II
844, 844H, 844K, D8N, D8R, D8R II, D9N, D9R, D9T
D8N, D8R, D8R II
D6H, D6R, D6R II
4T3017
EDGE-CUTTING
D6R II
D6R II
D6R II
D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6T
D5H, D5R LGP, D6M, D6N, D6N LGP
527, D5H, D5H XL, D5HTSK II, D5R LGP, D6M, D6N, D6N LGP
D5H, D6M, D6N
D7H, D7R, D7R II, D7R XR
631E, 631G, 637E, 637G, 844, 844H, 844K, D8N, D8R, D8R II
7T9127
EDGE-CUTTING
988B, 988F, 988F II, D8N, D8R, D8R II
988B, 988F, 988F II, D8N, D8R, D8R II