EDGE-CUTTING 7V0912 - Caterpillar

Illustration 1 g02796268
Remove the hydraulic tank filler cap.
The hydraulic oil filter is located on the left side of the machine.
Illustration 2 g02483300
Remove the plug at the bottom of the canister. Drain the oil into a suitable container.
Remove the canister.
Remove the filter element from the canister. Do not remove the center tube.
Clean the inside of the canister.
Clean the mounting base. Remove any part of the filter element gasket that remains on the filter mounting base.
Apply a thin coat of oil to seal on the new filter and o-ring.
Insert the new filter element into the canister.
Install the canister onto the base.
Install the plug into the bottom of the canister.
Maintain the hydraulic oil level between the top and the bottom mark on the sight gauge. Add oil, if necessary.
Inspect the gasket on the hydraulic tank filler cap for damage. Replace the gasket, if necessary.
Install the hydraulic tank filler cap.