9V0169 EDGE-CUTTING Caterpillar parts
966C
Rating:
Alternative (cross code) number:
CA9V0169
9V-0169
9V0169
CA9V0169
9V-0169
9V0169
Weight: 822 pounds 372 kg.
Information:
BEVEL ANGLE
22.5
BLUNT HEIGHT
15
mm
BOLT HOLE SIZE
1.25
mm
LENGTH
2870
mm
NARROW WIDTH
302
mm
NUMBER OF HOLES
2
OVERALL WIDTH
606
mm
THICKNESS
38.1
mm
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$2,020.15
07 Sep 2023
US: Florida-Parts-Z
9V0169 - Cutting ED fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$1,309.84
06 Sep 2023
Amazon.com
CTP 9V0169 Ground Engaging Tools Cutting Edge
CTP For Ground Engaging Tools || Longer tips || Sold in each
CTP For Ground Engaging Tools || Longer tips || Sold in each
$1,299.87
06 Jul 2023
Amazon.com
CTP 9V0169 Ground Engaging Tools Cutting Edge
CTP For Ground Engaging Tools || Longer tips || Sold in each
CTP For Ground Engaging Tools || Longer tips || Sold in each
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 9V0169:
Information:
Removal Procedure
Start By:
Release the system pressure.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the cooling system pressure cap is cool enough to touch with your bare hand.Remove the cooling system pressure cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Illustration 1 g06236296
Open right side access panel (1).
Illustration 2 g06236294
Illustration 3 g06236299
Loosen the clamps and disconnect hose (2), hose (3), hose (4), and hose (7).
Disconnect harness assembly (8).
Remove two bolts (6) and manifold (return) (5).Installation Procedure
Install manifold (return) (5) in the reverse order of removal.
Start By:
Release the system pressure.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the cooling system pressure cap is cool enough to touch with your bare hand.Remove the cooling system pressure cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Illustration 1 g06236296
Open right side access panel (1).
Illustration 2 g06236294
Illustration 3 g06236299
Loosen the clamps and disconnect hose (2), hose (3), hose (4), and hose (7).
Disconnect harness assembly (8).
Remove two bolts (6) and manifold (return) (5).Installation Procedure
Install manifold (return) (5) in the reverse order of removal.
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
924G, 950F II, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, 963B, 963C, 963D, 966C, 966D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 972H, 972K, 972M,...
950F II, 966C, 973, 973C, 973D, IT62G
950H, 962H, 966C, 966G, 966H, 966K, 966M, 966M XE, 972G, 972H, 972K, 972M, 972M XE
966C, 966K, 966M, 972K, 972M
6K6186
EDGE ASSEM.
966C
966C
6K6188
EDGE ASSEM.
966C
966C
7K1010
EDGE ASSEM.
966C
966C
7K1158
EDGE
966C
966C
966C
966C
7V6844
EDGE
966D
966D
5V6212
EDGE
966D
966D
5V6213
EDGE ASSEM.
966D
966D
3G4862
EDGE
980C
980C
3G4861
EDGE
980C
980C
1762871
EDGE-CUTTING
D400E II
D400E II
6W5521
EDGE
966D
966D
1299590
EDGE
950G II
950G II
3Y1525
EDGE
950
950
4E3183
EDGE ASSEM.
980F
980F