9W1878 EDGE-CUTTING Caterpillar parts
D6H, D6H II, D6H XL, D6H XR, D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL
Rating:
Alternative (cross code) number:
CA9W1878
9W-1878
9W1878
CA9W1878
9W-1878
9W1878
Weight: 91 pounds 41 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
21
mm
CHAMFER
EDGE
HOLE PATTERN
CENTERLINE
HOLE SPACING
152.4
mm
LENGTH
1227.3
mm
NUMBER OF HOLES
8
THICKNESS
19
mm
TUNGSTEN CARBIDE
N
WIDTH
254
mm
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 9W1878 Bulldozer Blade for Model D6, Center Edge, 0.75" Edge Thickness
CTP For Model D6 || Center Edge || 0.75" Edge Thickness
CTP For Model D6 || Center Edge || 0.75" Edge Thickness
RAParts 9W1878 Cutting Edge,Center Fits Caterpillar
Reliable Aftermarket Parts OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Reliable Aftermarket Parts OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
This part in 8 request:
Show.
This information for suppliers only!
2021-06-30
2021-06-01
2020-05-28
2020-05-27
2020-03-16
2019-05-27
2017-11-27
2017-11-27
Compatible equipment models: 9W1878:
Information:
Agricultural Tractor: MT735 (S/N: AKN1-UP) MT855 (S/N: BCC1-UP) MT865 (S/N: BDS1-UP) MTC855 (S/N: 8181-UP) MTC865 (S/N: 8191-UP)Articulated Truck: 735 (S/N: AWR1-UP) 740 (S/N: AXM1-UP) D350E Series II (S/N: 2XW1-UP) D400E Series II (S/N: APF1-UP; 8PS1-UP)Landfill Compactor: 826G Series II (S/N: AYH1-UP) 836G (S/N: BRL1-UP; 7MZ1-UP)Soil Compactor: 825G Series II (S/N: AXB1-UP)Engine: 3406E (S/N: 5GF1-UP; 5EK1-UP; 1MM1-UP; 2WS1-UP; 4AS1-UP; 5DS1-UP; 6TS1-UP; 1LW1-UP) C-15 (S/N: MBN1-UP; 6NZ1-UP; 9NZ1-UP) C-16 (S/N: 7CZ1-UP) C-18 (S/N: MDP1-UP)Generator Set: 3406E (S/N: 9NN1-UP; 8AZ1-UP) 3456 (S/N: BGA1-UP; CCB1-UP; EPE1-UP; C1G1-UP; C3G1-UP; C4G1-UP; CAH1-UP; GHJ1-UP; C2T1-UP; CBX1-UP) C18 GEN SET (S/N: C6C1-UP; G4C1-UP; STD1-UP; STM1-UP)Industrial Engine: 3406E IND (S/N: 6BR1-UP) 3456 IND (S/N: 3LW1-UP) C-15 IND (S/N: BEM1-UP) C-16 IND (S/N: BFM1-UP)Marine Engine: 3406E MARINE (S/N: 9WR1-UP)Excavator: 320B (S/N: 1XS1-UP) 325B (S/N: 6DN1-UP; 2JR1-UP; 8RR1-UP; 5LW1-UP) 385B (S/N: MYA1-UP; RCD1-UP; BKF1-UP; FDL1-UP; ANS1-UP; CLS1-UP; BKX1-UP; BLY1-UP) 5090B (S/N: CLD1-UP; SJY1-UP)Off-Highway Truck/Tractor: 770 (S/N: BZZ1-UP)Track-Type Tractor: D8N (S/N: 9TC1-UP; 1XJ1-UP; 5TJ1-UP; 7TK1-UP) D8R Series II (S/N: AKA1-UP; 6YZ1-UP) D8T (S/N: J8B1-UP; KPZ1-UP) D9N (S/N: 6XJ1-UP)Wheel Dozer: 824G Series II (S/N: AWW1-UP) 834G (S/N: BPC1-UP; 6GZ1-UP)Wheel Loader: 980G Series II (S/N: AXG1-UP; AWH1-UP; AYT1-UP) 980G (S/N: BGC1-UP) 988G (S/N: 1NZ1-UP) 988G (S/N: BNH1-UP; 2TW1-UP)Wheel Tractor-Scraper: 621B (S/N: 2GB1-UP; 45P1-UP; 35V1-UP) 621F (S/N: 4SK1-UP; 8PL1-UP) 621G (S/N: CEN1-UP; ALP1-UP; CEP1-UP) 623B (S/N: 46P1-UP) 623G (S/N: CES1-UP; ARW1-UP; CEW1-UP) 627E (S/N: 6EB1-UP; 6GB1-UP) 627G (S/N: AXF1-UP; CEX1-UP; CEZ1-UP) 651E (S/N: 88Z1-UP) 657B (S/N: 47M1-UP; 53K1-UP)Failure to follow the following torque sequence may lead to premature wear of the No. 1 camshaft bearing.
Illustration 1 g00593987
Sequence for tightening the camshaft gearUse the following procedure to tighten the camshaft bolts.
Lightly lubricate the O-ring seal on the outside of the sealing plate of the camshaft with a 50/50 mixture of 8T-2998 Lubricant and engine oil that is clean.
Apply 9S-3263 Thread Lock Compound to the three bolts for the sealing plate of the camshaft.
Tighten the three sealing plate bolts on the camshaft to the following torque.Torque ... 12 3 N m (9 2 lb ft)
Tighten the camshaft bolts in the following sequence. Refer to Illustration 1 for the numbering of the bolts. ... 1, 4, 2, 5, 3, 6, 1, 4Torque ... 240 40 N m (177 30 lb ft)
Illustration 1 g00593987
Sequence for tightening the camshaft gearUse the following procedure to tighten the camshaft bolts.
Lightly lubricate the O-ring seal on the outside of the sealing plate of the camshaft with a 50/50 mixture of 8T-2998 Lubricant and engine oil that is clean.
Apply 9S-3263 Thread Lock Compound to the three bolts for the sealing plate of the camshaft.
Tighten the three sealing plate bolts on the camshaft to the following torque.Torque ... 12 3 N m (9 2 lb ft)
Tighten the camshaft bolts in the following sequence. Refer to Illustration 1 for the numbering of the bolts. ... 1, 4, 2, 5, 3, 6, 1, 4Torque ... 240 40 N m (177 30 lb ft)
Caterpillar parts catalog:
Parts edge Caterpillar catalog:
4T2948
EDGE-CUTTING
D6R, D6R II, D7G, D7G2
D6R, D6R II, D7G, D7G2
4T6659
EDGE-CUTTING
321C, 321D LCR, D5H XL, D5R LGP, D6H, D6M, D6N, D6N LGP, D6R, D6R II, D6T XL
321C, 321D LCR, D5H XL, D5R LGP, D6H, D6M, D6N, D6N LGP, D6R, D6R II, D6T XL
4T2952
EDGE-CUTTING
D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL
D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL
1060956
EDGE-CUTTING
D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL
D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL
9U8057
EDGE - CUTTING
D5H XL, D5R LGP, D6M, D6N, D6N LGP, D6R II
D5H XL, D5R LGP, D6M, D6N, D6N LGP, D6R II
4T2985
EDGE-CUTTING
D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6T
D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6T
4T2991
EDGE-CUTTING
D6R II
D6R II
4T3010
EDGE-CUTTING
120K, 120K 2, 120M, 12K, 12M, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 3, 140M 3 AWD, 160K, 160M, 160M 3, 160M 3 AWD, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D6H
120K, 120K 2, 120M, 12K, 12M, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 3, 140M 3 AWD, 160K, 160M, 160M 3, 160M 3 AWD, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D6H
6Y3840
EDGE-CUTTING
D6R, D6R II
D6R, D6R II
4T2950
EDGE-CUTTING
D6R, D6R III, D6T, D6T LGP, D6T XL
D6R, D6R III, D6T, D6T LGP, D6T XL
4T2923
EDGE-CUTTING
814F, 814F II, 816B, 816F, 816F II, D6R III, D6T, D6T LGP, D6T XL
814F, 814F II, 816B, 816F, 816F II, D6R III, D6T, D6T LGP, D6T XL
4T2952
EDGE-CUTTING
D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL
D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL
4T6659
EDGE-CUTTING
321C, 321D LCR, D5H XL, D5R LGP, D6H, D6M, D6N, D6N LGP, D6R, D6R II, D6T XL
321C, 321D LCR, D5H XL, D5R LGP, D6H, D6M, D6N, D6N LGP, D6R, D6R II, D6T XL
1U0132
EDGE
D6H, D6R, D6R II
D6H, D6R, D6R II
1U0131
EDGE
D6H, D6R, D6R II
D6H, D6R, D6R II
4T2948
EDGE-CUTTING
D6R, D6R II, D7G, D7G2
D6R, D6R II, D7G, D7G2
1099093
EDGE-CUTTING
D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL
D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL
5G7303
EDGE-CUTTING
973, 973C
973, 973C
9V0255
EDGE-CUTTING
973, 973C
973, 973C
9U8057
EDGE - CUTTING
D5H XL, D5R LGP, D6M, D6N, D6N LGP, D6R II
D5H XL, D5R LGP, D6M, D6N, D6N LGP, D6R II
1060956
EDGE-CUTTING
D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL
D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL