EDGE-CUTTING 9W8215 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-8665(1) Cylinder Liner Puller Gp 1
A 373-1438(2) Cylinder Liner Puller Gp 1
(1) The 6V-9448 Cylinder Pack Puller is an optional Tool for removing the cylinder liner.
(2) Used to remove liner, piston, and connecting rod as an assembly.Start By:
Remove the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01149417
Use Tooling (A) to remove cylinder liner (1).
Remove liner seals (3) and filler band (2) from cylinder liner (1).